Summer Starts Here - Save up to 70%
Best 2007 Acura MDX Hitch Options- Video
Today on our 2007 Acura MDX we'll be looking at our best hitch options. We have two hitches here today. On the top we have a CURT class three, part number 13354. On the bottom we have a Draw-Tite class three, part number 75614. The main difference between our two hitches here today is that our Draw-Tite here has this extra tab welded onto it where you can mount your electrical connections for your trailer wiring such as your four-pole flat or your seven-way RV connection. Our Draw-Tite hitch here has an additional hole that's in front of the standard 5/8 diameter hitch pinhole. more
8/19/2016 1:21:17 PM
Trailer Hitch Installation - 2007 Acura MDX - Draw-Tite- Video
Today on our 2007 Acura MDX, we're going to be installing and taking a look at the Draw-Tite Max-Frame Trailer Hitch Receiver. This is a custom fit, class III hitch that's going to offer a 2" opening. Part number is 75614. Here's what your hitch is going to look like once you get it installed on the vehicle. As you can see, not a whole lot hanging down below our factory rear bumper. You'll have that round tube design, so it's pretty sleek, kind of tapers in, nice and narrow, 2" opening. more
3/23/2015 3:47:22 PM
Trailer Hitch Installation - 2007 Acura MDX- Video
Today on this 2007 Acura MDX, we are going to be installing Curt hitch part number C13354. Before we get started with our hitch installation, we are going to go ahead and show you a couple of the final install dimensions, which will help choosing your hitch accessories a little bit easier. From the top of the receiver tube opening to the ground is going to measure 16-1/2 inches and from the center of the pin hole to the clear end of the bumper is going to measure approximately 4 inches. Okay, let us go ahead and move on to our installation. 0:26 more
9/30/2011 4:40:44 PM
