Trailer Brake Controller Installation - 2014 Toyota Tundra- Video
Today on our 2014 Toyota Tundra, we'll be installing the Hopkins InSIGHT Flex-Mount Break Controller, part # HM47297. To install this break controller, we're also going to use the Hopkins Plug-In Simple Brake Wiring Adapter, part # HM47815. Now to begin our install, we'll first locate the manufacturers tow port so that we can plug our Direct-Fit Wiring Harness into it. Here on the driver's side kick panel behind the parking brake pedal, we can locate the manufacturers tow port. As you can see it's taped up to the main wiring harness, so I'm just going to use my utility knife to cut the tape and pull it free. Now that we've got the tow port free, we can take the white connector end of our Direct-Fit Wiring Harness, plug it directly into the manufacturers tow port. Next, we'll go ahead and route the four pull connector over to where we're going to mount the brake controller box. When routing your wires, stay away from any moving components such as the gas, brake, or emergency break pedal. more
12/31/2014 4:11:16 PM
