bing tracking image

2007 Toyota Tundra Trailer Brake Controller Installation And Review Videos

     

Trailer Brake Controller Installation - 2007 Toyota Tundra- Video

Trailer Brake Controller Installation - 2007 Toyota Tundra

Speaker 1: Today on our 2007 Toyota Tundra, we're going to be taking a look at and showing you how to install the Tekonsha Prodigy P3 Proportional Trailer Brake Controller for one to four axles, part number 90195. To help us get that installed, we're going to be using the Tekonsha Plugin Wiring Adapter, part number 3040-P. This is what our brake controller looks like when it's installed. What this is going to be good for, it's going to allow you to apply the brakes in your trailer whilst being towed. In turn, saving the brakes in your truck so it doesn't have to stop the trailer, the trailer's going to be able to slow itself down.These arrows right here on the left side, these are going to be your gain setting. You can see it goes up to 14 and goes all the way down to zero. more


Watch Video

6/6/2018 11:22:11 AM



Trailer Brake Controller Installation - 2007 Toyota Tundra 39510- Video

Trailer Brake Controller Installation - 2007 Toyota Tundra 39510

Speaker 1: Today on our 2007 Toyota Tundra, we're going to be taking a look at, and showing you how to install the Tekonsha Voyager proportional trailer brake controller for one to four axles, part number 39510.To help us get that installed, we're going to be using the Tekonsha plug-in wiring adaptor, part number 3040-P.This is what our brake controller looks like when it's installed. This is going to be a proportional brake controller. What that means is it's going to have a sensor inside that going to detect the deceleration of your Tundra, and it's going to send the appropriate amount of force to our trailer brakes. For instance, if we're in an emergency situation and we have to slam on our brakes in our truck, the sensor is going to immediately send that signal to our trailer brakes to match the amount of force being applied so that our trailer can slow itself down, in turn saving the Tundra's brakes, because it's not going to have to slow or stop both the truck and the trailer.Now this is going to be a pretty simple, straight-forward brake controller. It's not going to have any screens or anything like that to look at. It simply has a light that will change colors depending on how you have it set.This know here on the right, this is going to be your gain. more


Watch Video

6/4/2018 1:47:33 PM



Trailer Brake Controller Installation - 2007 Toyota Tundra TK90160- Video

Trailer Brake Controller Installation - 2007 Toyota Tundra TK90160

Speaker 1: Today on our 2007 Toyota Tundra, we're going to be taking a look at and showing you how to install the Tekonsha Primus IQ trailer brake controller for one to three axle, part number TK90160. To help us get that installed, we're going to be using the Tekonsha plugin wiring adapter, part number 3040-P.This is what our brake controller looks like when it's installed. What this is going to be good for is this is going to help you apply brakes to your trailer while you're traveling, in turn saving the brakes on your truck. This is going to be a proportional brake controller which means that the braking force applied in the truck will be matched on the trailer. For instance if we have a quick braking situation and you apply the brakes in your truck, the same amount of force will be applied to the trailer brakes so that the trailer will stop itself instead of the truck having to stop both.Now how this is going to differ from a time delayed, on a time delayed brake controller, when you apply the brakes in the truck it's going to take a few seconds for the brakes to be applied in the trailer. This is just the opposite. more


Watch Video

6/4/2018 1:47:11 PM



Trailer Brake Controller Installation - 2007 Toyota Tundra 3040-P- Video

Trailer Brake Controller Installation - 2007 Toyota Tundra 3040-P

Today we are going to install on a 2007 Toyota Tundra and we will be installing the brake controller part number 39519 the Tekonsha Prodigy. We will also be using part number 3040-p from Tekonsha which lets you plug into the factory tow package in the vehicle. We begin our install by finding a spot to mount our bracket onto. Just go ahead and put it up there and see if you like it as a nice place to put a brake controller. It should give you a pretty good idea of how it fits. Makes sure you can access the thumb wheel on top. Seeing the LED screen is equally important. Now that you know it is in the correct position you can go ahead and mark the holes before you drill them. Now we will go ahead and drill out our holes after we have marked them. more


Watch Video

6/2/2008 5:43:25 PM



  1