Draw-Tite I-Command Trailer Brake Controller Installation - 2005 Toyota Tundra- Video
Speaker 1: Today on our 2005 Toyota Tundra, we're gonna be taking a look at, showing you how to install, the Draw-Tite I-Command Trailer Brake Controller, for 1 to 4 Axles, part number 5535. Now, to help us in our installation we're also gonna be using the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers for Toyotas and Lexuses, part number 3040-P.So here's what our break controller looks like when it's fully installed. Now, our break controller is proportional, which means it's gonna apply our trailer breaks in the same intensity that our vehicle is slowing down. It's gonna do that because there's an inertia sensor inside, so when our vehicle starts to slow down, that sensor is gonna realize how much we're slowing down, apply our trailer breaks accordingly. Now, it's also gonna feature a manual override, in case you ever need to have a time where you need to apply the trailer brakes without applying the brakes on your truck. You can grab this lever, and if we start rotating it to the side, it will apply the maximum amount of breaks if we have it all the way over.Now, our gain setting is gonna be these gray buttons right here, and it's gonna max out at 10, and will go all the way down to zero. more
8/22/2017 10:02:06 AM
