Trailer Brake Controller Installation - 2010 Toyota Highlander- Video
Speaker 1: Today on our 2010 Toyota Highlander we're going to be taking a look and showing you how to install the Tekonsha Primus IQ trailer brake controller, part number TK90160. To help us with our installation we're going to be using the universal installation kit for brake controllers, part number ETBC7. Here's what our brake controller looks like fully installed. We chose to mount ours here on the kick panel right underneath our dash. Now this is a proportional brake controller, and what that means is it's going to activate our trailer brakes based on thee deceleration of our vehicle. It's going to activate immediately without any timed delay.Our brake controller is going to feature a nice easy to read display. more
11/29/2017 4:32:20 PM
Trailer Brake Controller Installation - 2010 Toyota Highlander 90195- Video
Today in this 2010 Toyota Highlander, were going to install the Tekonsha P3 Brake Controller, part number 90195. To install this brake installer, well also be using the ETBC7 kit and a tow-ready universal mounting bracket, part number 18136. First Im going to install my seven-pole bracket that comes in my kit with the universal mounting bracket. Next, well go ahead and put our bracket on the hitch. Once I have my bracket attached, Ill just use a pair of tune snips to cut off the access from the band. Now weve got our simple bracket and universal mounting bracket attached to the hitch, well go ahead and install our seven pole connector. more
1/19/2012 10:00:41 AM
