Trailer Brake Controller Installation - 2011 Nissan Pathfinder- Video
Speaker 1: Today in this 2011 Nissan Pathfinder, we'll be having a look at and show you how to install the Tekonsha Prodigy P3 Trailer Brake Controller. Part number 90195. To ease our install, we'll be using the Tekonsha plug in wiring adapter for Nissan vehicles, part number 3050-P. Here's what our brake installer looks like installed. Now the reason you're gonna want an electric trailer brake controller such as this one, is that this gives you the ability to control electric trailer brakes on your trailer. That way you can stop safer and easier than without them.Now this particular brake controller is a proportional brake controller, and what that means is, as you're coming to a stop, if you're only using a little bit of brakes in your vehicle, it'll apply the brakes on the trailer to match. more
6/29/2018 10:22:36 AM
Trailer Brake Controller Installation - 2011 Nissan Pathfinder 39510- Video
Today on this 2011 Nissan Pathfinder we're going to install part number 39510 from Tekonsha. This is the Voyager trailer brake controller. This vehicle has already been equipped with a 4-pole wiring packaging from the factory. To add our brake controller and connector, we're basically going to just fill in the blanks. We're going to start off underneath the dash. We're going to locate the tow package port underneath the dashboard which is going to be just right of the steering wheel, behind the dash, and also a little bit above the diagnostic port. We'll go ahead and take the adapter cord and plug it into the brake controller, and then we'll go ahead and plug it into the port underneath the dash. The part number for our adapter cord will be3050-P. more
3/15/2013 3:02:39 AM
