Best 2005 GMC Sierra Brake Controller Options- Video
Speaker 1: Today we're going to be taking a look at the best brake controllers available for the 2005 GMC Sierra 1500, 2500, and 3500. Now, we chose these brake controllers based on several different factors, mainly ease of use and the experience that we have with them here in the shop, and also what our customers say about them, which ones they like, which ones they have problems with.Here we have our Curt TriFlex. Here's the Tekonsha Prodigy P3; this is an extremely popular brake controller that we carry. The Redarc Tow-Pro Elite, and for kind of a curve ball we've got the prodigy RF. This is a radiofrequency model that actually mounts to your trailer. You just need to have a working 7-pole on your truck and then a working 12-volt outlet, and the handheld here acts just like your brake controller would.Now, all the brake controllers that we're going to look at today are proportional controllers. more
8/24/2018 2:27:42 PM
Trailer Brake Controller Installation - 2005 GMC Sierra- Video
Today, on a 2005 GMC Sierra, were going to be installing Hopkins Flex-Mount brake control, part number hm47297. In conjunction with Hopkins direct fit brake control adapter which is part number hm47795.To begin our install, were going to mount the Flex-Mount display unit here in the center console. First, well remove the center console trays and route the wire up through the pre-drilled hole in there. Well follow the 12-volt power supply back down through the console. Then, well zip tie the wire to the 12-volt power supply wires to secure it in place, cut off the excess from the zip-tie and re-install the panel.Then, well secure the Flex display in place using double sided tape. Now, to install the Flex control system were going to mount it on the side of the center console, that way its easy to access all of the different controls as well as the manual override. more
5/13/2013 10:19:22 AM
Trailer Brake Controller Installation - 2005 GMC Sierra 3015-P- Video
Alright today on this 2005 GMC Sierra, we are going to install part number 90885, the Prodigy P2 brake controller and part number 3015-P, the brake controller adapter. First step that we need to do is to remove this cover for access to the port that is behind here. So we will undo this nut and pop the cover off. We will take our cord and just plug it into place. Moving on, we will reinstall the cover and then put the nut back into place. Alright next we will go ahead and install our brake controller bracket and we are going to do that on a sheet metal at the bottom of the dash here. more
12/20/2011 7:01:40 AM
