Trailer Brake Controller Installation - 2010 GMC Acadia- Video
Today on our 2010 GMC Acadia we'll be installing the Etrailer Universal Install Kit for Brake Controllers, part number ETBC7 in conjunction with the Tekonsha Prodigy P2 Brake Controller, part number 90885. In addition we'll be using the Draw Tite No Drill Mounting Bracket, part number 18136.We'll begin by installing the seven pole bracket onto our seven pole connector. We'll use the hardware provided with our install kit securing the bracket to the connector. Then we'll take the no drill mounting bracket and secure it to the seven pole bracket with the hardware that's included. Now before I install the bracket onto the vehicle I'm going to go ahead and take some black electrical tape and wrap up these wires.Note for our application we'll not be using the purple wire which is for reverse trailer lights so we'll go ahead and clip it off as it will not be necessary. We'll wrap it up all the way until our first connection point. more
5/31/2013 12:36:04 AM
