2009 Chevrolet Express Van Trailer Brake Controller Installation And Review Videos

Trailer Brake Controller Installation - 2009 Chevrolet Express Van- Video

Today on our 2009 Chevrolet Express Van, we'll be installing the ETBC7 kit, part number ETBC7 and in conjunction with that, we'll be installing the Prodigy P2 Brake Controller, part number 90885. For this vehicle here, it already has a four flat wiring connection installed, but it's stored inside the vehicle and not underneath the vehicle. We're going to need to first get the four flat wiring connection down underneath the vehicle near the center of the hitch. Let's go ahead and show you how to do that. Now, we first need to remove this panel right here. To actually remove the panel, you'll stick the flathead screw driver on the trim panel removal tool underneath the bottom side and pry outward or towards the front of the vehicle. Now, up inside this opening here, there's a piece of plastic that kind of lock things off. We're going to need to take a large flathead screwdriver and loosen that up a little bit so we can slide our wiring down past it. more

4/22/2014 3:19:34 PM