2015 Kia Soul Tow Bar Wiring Installation And Review Videos

Roadmaster Universal Diode Wiring Kit Installation - 2015 Kia Soul- Video

Speaker 1: Today on our 2015 Kia Soul we're gonna be taking a look at and showing you how to install the Roadmaster Universal high powered diode wiring kit, part number RM-152. Now to help us with our install we're gonna be using the Roadmaster seven wire to six wire Flexo-Coil Kit, part number RM-146-7.Here's what our wiring looks like installed, it is gonna include an umbilical cord to connect our RV to our vehicle and the wiring is gonna allow us to use our factory lights and accept the signals from our RV so that people can know whether we're going down the road with our taillights on, brake lights, and our turn signals. This is gonna take away the need for the magnetic lights you see a lot on towed vehicles and it's gonna use our factory lights and it's gonna have some diodes that are gonna tap into our factory wiring preventing any kind of feedback coming from our RV and damaging our factory wiring.Now that we know how our wiring is gonna work let's show you how to get it installed. With our baseplate torqued down and everything in place now would be a good time if you are doing wiring to go ahead and at least bring your wires while the fascia's off, making it a little bit easier to get where we need to go. I'm just gonna take my wiring, I'm actually just gonna loop it around these posts right here, just leave it right there with a little loop so I have plenty to work with. I'm gonna start routing it towards the engine and once we get it up passed everything I'm just gonna come up behind my headlight here and I'm gonna leave it up in the engine bay for now.With our fascia back on I'm gonna slightly pull my wire out just a little bit. more

3/16/2018 5:03:19 PM

Roadmaster Diode 7 to 6 Wire Coil Kit Installation - 2015 Kia Soul- Video

Speaker 1: Today on 2015 Kia Soul, we're going to be taking a look at and showing you how to install the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit, part number RM-15267.Here's what our wiring looks like installed. It is going to include an umbilical cord to connect our RV to our vehicle, and the wiring is going to allow us to use our factory lights and accept the signal from our RV, so that people can know whether we're going down the road with our tail lights on, brake lights, and our turn signals. This is going to take away the need for the magnetic lights that you see a lot on towed vehicles, and it's going to use our factory lights. It's going to have some diodes that are going to tap into our factory wiring preventing any kind of feedback coming from our RV and damaging our factory wiring. Now that we know how our wiring is going to work, let's show you how to get it installed.With our base plate torqued down and everything in place, now would be a good time, if you are doing wiring, to go ahead and at least run your wires while the fascia's off, making it a little bit easier to get where we need to go. So, I'm just going to take my wiring. more

3/16/2018 5:02:13 PM