Best 2007 Jeep Wrangler Unlimited Tow Bar Wiring Options- Video
Speaker 1: Today we're going to be taking a look at the best tow bar wiring for your 2007 Jeep Wrangler Unlimited. Here on your left we're going to have Hopkins part number HM56200. Here in the center we're going to have Roadmaster part number RM-15267. Here on your right we're going to have the bulb and socket, Roadmaster's bulb and socket, part number 152-LED.My opinion, I would go with this kit right here in the middle, Roadmaster's seven to six-way Flexo-Coil diode kit. It's going to come with everything you need to hook up from your vehicle to your RV. It's going to give your six-pole plug, your bracket. more
11/27/2018 11:17:47 AM
Roadmaster Diode 7 to 6 Wire Coil Kit Installation - 2007 Jeep Wrangler Unlimited- Video
Today on our 2007 Jeep Wrangler Unlimited, we'll be installing the Roadmaster Diode 7-Wire to 6-Wire Flexo-coil Wiring Kit. This is part number RM-15267. The Roadmaster tow bar wiring diode kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV. It lets you wire your vehicle to accept your RV's tail, brake and turn signal lights for flat towing. Here's what our kit consists of, the most important part being the four diodes that we're going to use to tap into our vehicle's stock wiring, so we can have towed vehicle lights behind our RV. We have a bundle of four pole flat wiring here. We'll run this to the front of our Jeep using this connector here, which is a six pole, where the flexo wiring here will connect to. more
6/27/2016 12:12:39 PM
Roadmaster Universal Diode Wiring Kit Installation - 2007 Jeep Wrangler Unlimited- Video
Today on our 2007 Jeep Wrangler unlimited, we'll be installing the Roadmaster Universal Hy-Power Diode Wiring Kit, part number RM-152. In conjunction with this, we'll also be using the Roadmaster 7-wire to 6-wire Flexo-Coil Kit, part number RM-146-7. The Roadmaster tow bar wiring diode kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV unless you wire your vehicle to accept your RV's tail brake and turn signal lights for flat towing. Here's what our kit consists of, the most important part being the four diodes that we're going to use to tap into our vehicle's stock wiring so we can have towed vehicle lights behind our RV. We have a bundle of 4-pole flat wiring here so we will run this to the front of our Jeep using this connector here, which is a 6-pole where the Flexo wiring here will connect to. Then we have the standard 7-way RV flat which will go in the back of the RV. We have several zip ties here to secure all of our wiring, and some wire loom mesh included as well in case we need to protect it from any moving parts or sources of heat. We also have an optional bracket here in case your tow bar base plate doesn't already have a spot to put your connector here, so this'll allow you to attach it. more
6/27/2016 12:11:43 PM
