Best 2014 Jeep Wrangler Flat Tow Set Up Options- Video
Shane: Hi, I'm Shane with etrailer.com. Today I'm going to be go over the best flat tow setup for your 2014 Jeep Wrangler. Flat towing your vehicle behind your motor home is going to make life a lot easier for you when you get to a campsite because you can leave your motor home set up, because you're going to have another vehicle to get you out and about.There's going to be five main components required for flat towing any vehicle. There's going to be a six and seventh component, that I'm going to recommend. Let's go over those components now. Our first component is going to be our baseplate. more
11/20/2019 9:53:12 AM
Roadmaster Diode 7 to 6 Wire Coil Kit Installation - 2014 Jeep Wrangler- Video
Speaker 1: Today on our 2016 Jeep Wrangler, we're going to take a look at and also show you how to install the Roadmaster diode wiring kit for towed vehicles with the seven wire to six wire flexo-coil kit, part number is RM-15267.Now this wiring kit's going to be the perfect solution for towed vehicles. This is going to take a working seven pole plug and we're going to transfer that right back as if our Jeep we're a trailer. So anytime the blinkers, brakes, or running lights come on in our RV, that's going to be transfer back and we'll see it on the lights on our Jeep.Now let's test our lighting system out. You'll want to hook it up to either a tester or your motor home. Start by turning on our running lights. Then we do our left blinker, our right blinker.Now the diodes are going to play an important role in our towed vehicle wiring, these prevent backfeeding. more
4/12/2018 4:02:10 PM
Roadmaster Tow Bar Wiring Kit Installation - 2014 Jeep Wrangler- Video
Today on our 2014 Jeep Wrangler, were taking a look at in installing the Roadmaster Universal Hy-Power Diode Wiring Kit, Part Number: RM-154. The first thing that were going to want to do in the installation of our Hy-Power Diode Wiring Kit is going to be to remove the Phillips head screws here at the back of the taillight and remove the taillight assembly from the vehicle. Once you we have it removed from the backside of the vehicle, well go ahead and unplug the manufacturing wiring harness. To do so, depress the tab and pull out. Then well pull back the tape here and peel back the wire loom so we can expose these wires. Once we have the wires exposed, well go ahead and take a wire tester and test our circuits. Now go ahead and test our right turn signal. more
10/29/2015 10:22:07 AM
