2017 Jeep Grand Cherokee Tow Bar Wiring Installation And Review Videos

Roadmaster Tow Bar Wiring Kit Installation - 2017 Jeep Grand Cherokee- Video

Hi there Jeep owners. Today in your 2017 Jeep Grand Cherokee, we're going to be taking a look at and showing you how to install Roadmaster's Diode Wiring Kit. There's five different kits available here at etrailer.com for your diode wiring. And they're all basically the same with the only difference being the type of connections that you're going to be using with them. There is a kit that comes with no connector or cable. So if you want to set your own full setup, you can go with that and you'll get your diodes and your wiring. more

7/15/2020 11:43:30 AM

Best 2017 Jeep Grand Cherokee Tow Bar Wiring Options- Video

Today you're going to be taking a look at the best tow bar wiring options for your 2017 Jeep Grand Cherokee. Whenever you're flat towing your Jeep Grand Cherokee behind your motor home, we want to make sure that we have a safe ride. So part of that is making sure that the lights on our motor home match the lights on our Jeep Cherokee. That's where our tow bar wiring is going to come in. Whether we're driving down the highway or parking or pulling up to the campground, our lights on our Jeep are going to mimic the lights on our motor home so if we do slow down or change lanes, everyone around us is going to know exactly what's going on.We're going to have two basic types of wiring that are going to be available for our Grand Cherokee. We'll have the removable magnetic lights and then a diode kit. more

3/6/2019 10:02:33 AM

Tow Ready Tail Light Isolating Diode System Installation - 2017 Jeep Grand Cherokee- Video

Speaker 1: Today on our 2017 Jeep Grand Cherokee we're going to be taking a look at and showing you how to install the Tow Ready Taillight Isolating Diode System with Four Pole Connector, part number TR118821. This diode system is going to provide a proper lighting function for your towed vehicle. The diodes protect your RV from any back feed if there is a problem in the wiring from your vehicle, and vice versa. It's going to protect your vehicle from any back feed from the RV. Now let's show you how to get this installed.First thing we're going to do is we're going to start by removing our taillight. You take a trim panel tool, and you're just going to gently pull out on these pins until they come all the way out. more

8/7/2017 8:12:06 AM