Best 2013 Jeep Grand Cherokee Tow Bar Wiring Options- Video
Today you're going to be taking a look at the best tow bar wiring options for your 2013 Jeep Grand Cherokee. Whenever you're flat towing your Jeep Grand Cherokee behind your motor home, we want to make sure that we have a safe ride. So part of that is making sure that the lights on our motor home match the lights on our Jeep Cherokee. That's where our tow bar wiring is going to come in. Whether we're driving down the highway or parking or pulling up to the campground, our lights on our Jeep are going to mimic the lights on our motor home so if we do slow down or change lanes, everyone around us is going to know exactly what's going on.We're going to have two basic types of wiring that are going to be available for our Grand Cherokee. We'll have the removable magnetic lights and then a diode kit. more
3/6/2019 9:53:13 AM
Hopkins Custom Tail Light Wiring Kit Installation - 2013 Jeep Grand Cherokee- Video
Speaker 1: Today on our 2013 Jeep Grand Cherokee, we're going to be taking a look at and showing you how to install the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles, part number HM56207.Whenever we're flat towing our Jeep behind our motor home, it's going to be important that all of our lights match each other. That way if we change lanes or if we slow down, we can safely make sure that everyone around us knows what's going on. Well our wiring kit is going to do that exactly. It's going to take the signal from our motor home and transfer them directly into our Jeep's taillights. That way we're not going to have to worry about making sure that they match up.Our wiring kit's going to give us all of our basic light functions, like our taillights, our turn signals, and our brake lights. It's going to prevent us from having to hook up those magnetic lights, set everything up every time that we tow our Jeep, as well as take them down when we want to drive. more
12/5/2018 11:32:40 AM
Roadmaster Tow Bar Wiring Kit Installation - 2013 Jeep Grand Cherokee- Video
Today on our 2013 Jeep Grand Cherokee we'll be installing Roadmaster universal diode kit for towed vehicles, part number RM-154. To begin our install we're going to start at the rear of the vehicle and open up the rear hatch. Next we'll remove both rear taillight assemblies by removing the two push pin fasteners that secure each in position. To remove the push pin fastener we'll pry out on the center of the fastener with just a flat blade screwdriver, and then remove the fasteners completely. We'll go ahead and pop the taillight out. To make it easier you can use the flat blade screwdriver, or we're going to be using a plastic pry tool to get on the front edge of the taillight so it will release from the alignment pins underneath, being careful not to break them. Then we'll go ahead and release the connector from the socket. more
10/30/2014 4:59:09 PM
