Best 2011 Jeep Grand Cherokee Tow Bar Wiring Options- Video
Today you're going to be taking a look at the best tow bar wiring options for your 2011 Jeep Grand Cherokee. Whenever you're flat towing your Jeep Grand Cherokee behind your motor home, we want to make sure that we have a safe ride. So part of that is making sure that the lights on our motor home match the lights on our Jeep Cherokee. That's where our tow bar wiring is going to come in. Whether we're driving down the highway or parking or pulling up to the campground, our lights on our Jeep are going to mimic the lights on our motor home so if we do slow down or change lanes, everyone around us is going to know exactly what's going on.We're going to have two basic types of wiring that are going to be available for our Grand Cherokee. We'll have the removable magnetic lights and then a diode kit. more
3/5/2019 10:28:15 AM
Hopkins Custom Tail Light Wiring Kit Installation - 2011 Jeep Grand Cherokee- Video
Today, this 2011 Jeep Grand Cherokee, we're going to review and install the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles, Part number HM56207.This will provide all the signals you need. Turn signals, left and right, your running light circuit and your brake lights.You can use a bulb and socket in some vehicles, however, when you use a wiring system like this, you don't have to worry about drilling a hole in the back of your tail light and worrying about sealing up and getting moisture inside tail light when you're done installing it.Before we get ready to install, we'll cover the parts and which direction all the wires go. Pretty easy. The T-connector to yellow wire goes to the driver's side and the T-connection with the green wire goes over to your passenger side. Of course, the 4-pole wiring harness is going to go up towards the front of the vehicle.The kit also comes with a holder for a 4-pole flat, if you're going to stay with that, some zip ties to hold the wires, some screws for the bracket and some dielectric grease to protect your electrical connections and also a cap for a 4-pole.To start off our install, we remove both our tail lights. This is our driver's side here. more
1/7/2019 11:22:51 AM
