Roadmaster Tow Bar Wiring Kit Installation - 2010 Hyundai Elantra- Video
Today on our 2010 Honda Elantra, well be installing the Roadmaster Universal High Powered Diode Wiring kit, part number RM-154.To begin our installation, here at the bumper, well install a bracket for our four pole. With that installed, we'll go ahead and take our four pole here on the front of the vehicle and attach it to our bracket. With that done, we'll go ahead and route our wiring toward the back of the vehicle to the taillights. Now as we are routing our wiring, we'll want to make sure that we stay away from any hot components such as the vehicles exhaust or moving components like the vehicle suspension in order to keep our wire in good shape. This will prevent it from getting hot like it would next to your vehicles exhaust or from being broken like it would from being next to your vehicles suspension.Now back here, on the back of the vehicle, we'll find a rubber grommet on the drivers side rear fender. We'll go ahead and cut the grommet to allow our wiring to pass through it.Were now in the vehicles trunk. more
4/5/2013 11:00:07 AM
