Trailer Wiring Harness Installation - 2012 Ford Edge HM56001- Video
Today, this 2012 Ford Edge, we're going to show you the Hopkins Custom Tail-light Wiring Kit for towed vehicles, part #HM56001. This is what the wire harness looks like before we install it. We'll go ahead and cover some of the details of it. First off is a T-type connection. You have these two connection points, the one side, yellow wire, goes between the connection point between the tail-light and a wire harness on a driver's side. We go over here, you notice we have a long length of wire, and another T-connector. more
8/9/2015 9:46:06 AM
TrailerMate Tail Light Wiring Kit Installation - 2013 Ford Edge- Video
Today on our 2013 Ford Edge, well be installing the TrailerMate custom tail light wiring kit for towed vehicles part number TM782057. Now to begin our install, well start the rear of the vehicle where we are putting up the rear hatch. Next, well remove the spare tire cover and rear threshold. To remove the rear threshold, well simply gently pull up on the rear threshold until it releases the fasteners underneath. Well set the rear threshold to the side and then remove the 2 foam cutouts on either side of the spare tire. Next, well remove the tail light assembly starting on the passenger side.To remove the tail light assemblies, well remove the 2 fasteners that secure the housing and then gently pop the tail assembly out of its location being careful not to break the alignment tabs underneath. more
3/10/2014 9:15:35 AM