SMI Stay-IN-Play DUO Braking System Installation - 2011 Ford Fusion- Video
Hey everybody. Ryan here at etrailer.com. Today on our 2011 Ford Fusion, we're going to be taking a look at and showing you how to install the Demco Stay-in-Play Duo supplemental braking systems. There's going to be six main components needed to flat tow your Fusion. Going to need a base plate, diode wiring, a braking system, a tow bar, safety cables, and a brake light relay. Now whenever you're flat towing your vehicle behind your motor home, a braking system is going to be required by law in all 50 states.Now, what I really like about this system is that it's proportional. more
7/3/2019 12:42:45 PM
Roadmaster Brake-Lite Relay Kit Installation - 2011 Ford Fusion- Video
Ryan: Hey everybody, Ryan here at etrailer.com. Today on our 2011 Ford Fusion, we're going to be taking a look at and showing you how to install the Roadmaster Brake-Lite Relay Kit. Well, our brake light relay is going to be one of six main components needed to flat tow our Ford Fusion. The other five are going to be the base plate, our diode wiring, our braking system, safety cables, and a tow bar.Now, the reason you're going to need a brake light relay, is that when you're flat towing your Fusion behind your motorhome and you turn the motorhome's blinker on, the blinker back here will flash normally, unless you happen to hit the brakes inside of your motorhome at the same time. Then what's going to happen is back here, the brakes are going to override our turn signals, and then other motorists won't know if we're turning or stopping.Now the way that relay is going to work, is that it's going to tap into your brake pedal position sensor wire, and it's going to separate those circuits. Now installation is going to be relatively simple, we're only going to be working with a handful of wires to get the job done. more
7/2/2019 1:53:48 PM
