SMI Air Force One Braking System Installation - 2014 Ford Edge- Video
Hi, I'm Shane 00:00:01 with etrailer.com. Today, we're going to be taking a look at showing you how we installed the Demco Air Force One braking system on our 2014 Ford Edge. What the braking system's going to do, it's going to give you a brake system in the car while it's being flat towed, so you don't have to rely on the brakes from the RV to slow down both vehicles.With the Air Force One, it relies on air pressure from the RV. It's going to send the air pressure when you apply the brakes in the RV. It's going to send in the air pressure through this line through an operating unit that is mounted inside the vehicle. An air line tube is ran inside to a cylinder that is mounted on the brake pedal arm. more
3/28/2019 3:54:17 PM
Roadmaster Brake-Lite Relay Kit Installation - 2014 Ford Edge- Video
Speaker 1: Today on our 2014 Ford Edge, we'll be having a look at, and installing the Road Master Brake Light Relay Kit from Tow Vehicles. Part number RN-88400.So, when we don't have a brake light relay installed on our towed vehicle, when we are towing it behind our motor home, and our turn signal is on, and then our breaks are depressed, we have the issue of our brake lights coming on, on our towed vehicle overriding the turn signal from our motor home. Now, with the brake light relay installed and operating, when we step on the brakes on our RV with our turn signal on, our brake signal does not override the turn signal function when the brakes are applied inside of our towed vehicles with the supplemental braking system.Now that we've gone over some features, we'll show you how to get it installed. To begin our install, we find ourselves underneath the hood of our Edge on the driver's side near our battery. This brown wire here that I have in my hand is a wire that we passed through our firewall in a grommet behind our battery. If you remove your battery, you have easy access to this grommet. more
8/10/2017 1:32:06 PM
SMI Stay-IN-Play DUO Braking System Installation - 2014 Ford Edge- Video
Today on our 2014 Ford Edge, were going to be installing the SMI Stay-IN-Play DUO Supplemental Breaking System in a proportional design, part number SM99251. Lets show you how the system works as it pulls the pedal in. Now, weve gone ahead and turned on the G-Force controller box. Well go ahead and pull out the breakaway pin. Now, were going to go ahead and begin our installation by first raising up the hood. Now with our hood open, were going to need to remove several fasteners here across the top as well as in other locations on the front fascia in order to remove it.Well need to remove these two bolts, one here and here, as well as four push fasteners that go across the top. more
1/7/2015 8:55:17 PM
