Best 2014 Ford C-Max Tow Bar Braking Systems- Video
Speaker 1: Today we're going to be taking a look at the best braking system options for your 2014 Ford C-Max. The best braking system for your C-Max is going to depend on your motor home and how you want it to operate. We'll start by taking a look at the full electric proportional braking systems.Here we have the Stay-IN-Play DUO. This is going to be a permanently mounted option that's going to live inside your vehicle all the time. It's going to be proportional using an inertia sensor internal to the unit, and it'll be adjustable. This system just wires right in and doesn't use any of the air brakes on your motor home. more
9/14/2018 8:12:32 AM
SMI Stay-IN-Play DUO Braking System Installation - 2014 Ford C-Max- Video
Today on our 2014 Ford C-Max, we'll be installing the SMI Stay-IN-Play DUO Supplemental Braking System, part number SM99251. First thing to note with this application, the SMI operating unit doesn't actually need the vacuum assist, so we're just going to go ahead and take a pair of side cutters, or tin snips, and cut our vacuum hose short. Next thing to note is the lack of clearance for mounting our Stay-IN-Play box here in the engine compartment. We're going to take our Stay-IN-Play operating unit and mount it in the back seat, underneath the driver's seat, to an access panel. With my seat moved all the way up and we remove the floor mat, we can easily see the access panel. The access panel allows for access to the charging cord for the C-Max vehicle. Special note, when mounting the box, make sure you leave enough wire and airline that you can actually remove the panel when necessary. more
1/20/2015 2:05:43 PM
Roadmaster Stop Light Switch Kit Installation - 2014 Ford C-Max- Video
Today on this 2014 Ford C-max, we're going to install part number RN-751459 from Road Master. This is Road Master stoplight switch kit. To start off, we'll go ahead and work with our bracket that comes with the kit and your actual stoplight switch. What we're going to do is install the two together for now loosely. Then I'm going to run this about three threads past the edge of the nut. We'll tighten this one down. more
1/7/2015 2:38:08 PM
