Rhino Rack Roof Rack Review - 2012 Toyota Highlander- Video
Today on this 2012 Toyota Highlander we're going to be test fitting the Rhino Rack Vortex Aero crossbars roof rack system, consisting of part number RRVA126B-2, those are going to be the crossbars, and then part number RRSX005, and those are going to be the SX series legs for the crossbars. We already have the front one installed here. You can see they have a nice aerodynamic shape, and the two bars together have a carrying capacity of a hundred and sixty-five pounds, although you want to double check with your manufacturer's instructions to make sure that your roof can withstand that amount of weight. Let's go ahead and show you how the rear ones install. We have one partially assembled on our table here. The first thing I'm going to do is I'm going to go ahead and flip this upside down. We're going to take one of our legs and we're going to go ahead and install it. Let me flip it around here. more
6/16/2016 10:57:27 AM
Thule AeroBlade Edge Roof Rack Installation - 2012 Toyota Highlander- Video
Today on our 2012 Toyota Highlander, we'll be test fitting the Thule AeroBlade Edge roof rack for raised factory side rails, part number TH7503-TH7503. With our load bars assembled according to the instructions, we'll begin our test fit by placing half of our roof rack system onto the front part of our side rails. Once we have it fit in place, we can grab our strap, take it under our side rail, fitting it back into the head of our load bar. You'll notice that on the strap there are slots numbered 1 through 4. This is to accommodate the different size of side rails that your vehicle may have. Today we'll be setting it on setting #3. more
7/9/2013 11:08:30 AM
Rhino Rack Roof Rack Installation - 2012 Toyota Highlander- Video
Today on our 2012 Toyota Highlander well be test fitting a Rhino Rack Roof Rack System. Well be using the bars part number DA1375 and the fit kit part number DK138. You can also use the black bars which are part number DA1375B. Weve already got a roof rack system assembled according to the instructions so now were ready to mount it up on top of our vehicle. Well take the front crossbar assembly and set it up on top of our roof. Well need to measure 150 mm from the center of the gap between the doors to the center of our crossbars line. more
8/17/2012 3:14:22 PM
Thule AeroBlade Crossroad Roof Rack Installation - 2012 Toyota Highlander- Video
Today, we have a 2012 Toyota Highlander and we're going to be test fitting a Thule AeroBlade Roof Rack System. We'll be using the 60-inch AeroBlade bars, part number THARB60 as well as the Rapid Crossroad Feet, part number TH450R. We have our load bar assemblies put together and now we're ready to mount them up on top of the vehicle. To position the front bar correctly, we do need to make sure that the bar is overhanging on the driver and passenger's side. We also want to make sure that the Aero indicator on the sides of the crossroad feet are pointed towards the center of our side rail. Finally, we want to make sure that the front bar runs perpendicular to our raised side rails. more
8/10/2012 11:00:49 AM
Thule AeroBlade Crossroad Roof Rack Installation - 2012 Toyota Highlander TH450R- Video
Today, we have a 2012 Toyota Highlander and we're going to be test fitting a Thule Roof Rack System. We'll be using the 53-inch AeroBlade load bars, part number THARB53 as well as the Rapid Crossroad Foot Pack, part number TH450R. So we already have our load bars assembled and now we're ready to mount them up on top of the vehicle. Since this set is designed to work with vehicles with factory raised side rails, there are no set positioning measurements. We'll set the first bar up on top of our raised side rails. We need to make sure that the front bar is running perpendicular to our raised side rails, so in order to do this, we'll measure from a fixed point on our side rails to the leading edge of the crossroad foot on both sides of the vehicle and make sure it's the same measurement. more
8/10/2012 11:00:19 AM
