Inno Roof Rack Review - 2010 Toyota Highlander- Video
Today on our 2010 Toyota Highlander, we're going to take a look at the Inno AeroBar Roof Rack System. The crossbars are INXB145-2, and the feet are INXS150. I have the first one already on. Actually, pretty easy to install. I'm going to show you how to do the second one. we have here ... more
1/14/2016 8:46:39 AM
Rhino Rack Roof Rack Review - 2010 Toyota Highlander- Video
Today on our 2010 Toyota Highlander, we are going to take a look at the Rhino-Rack vortex aero crossbars, roofing rack system. The crossbars are RRVA126B-2, and the foot pack will be RRSX005. I have the first one already on. I'm going to go ahead and put the second one on now. It's real easy to install. What we have here, we have our crossbar, we have our foot pad, and we have an endcap, and this is the tool we use. I'm going to go ahead and slide this on here, so we have to take our endcap off first. more
1/14/2016 8:41:55 AM
RockyMounts Roof Rack Review - 2010 Toyota Highlander- Video
Today on our 2010 Toyota Highlander we're going to take a look at the Rocky Mounts Arrow Bar Roofing Rack System. The crossbars are RKY3056 and then our flagstaff towers are RKY3002. Now, we have the first one already on our front one. It's pretty simple to install so we're going to show you how to install a second one. Now we have our crossbar, we have our flagstaff towers, we have our end caps, we have the tool the comes with it and we have a tape measure. Now to put on our towers take this side and slide that through our T, t-slide like so. As soon as you get them on we can load them on the vehicle and we can start tightening it down. So, lets make sure I got the bars the right way. more
1/14/2016 8:41:01 AM
Thule AeroBlade Crossroad Roof Rack Installation - 2010 Toyota Highlander- Video
Today we have a 2010 Toyota Highlander and we will be test footing a Thule roof rack using the 53 inch aero blade bars and the rapid cross road feet. We already have our load bars put together and now we are ready to mount them up on the vehicle. Since this vehicle has factoring side rails theres no set cross bar spread, Thule also specifies this measurement is not to exceed 38 inches. First Ill place our load bar assembly up on top the side rails. We need to check three things when we position this side bar, we need to make sure the lower bar is hanging over evenly on both sides of the vehicle, we also need to make sure the triangle mark and the side of our feet are pointing towards the center pf pour side rail, and finally we need to make sure that this load bar is running perpendicular to our factory made side rails. To do this well measure from a fixed point of the side rail on both sides of the vehicle to the leading edge of the cross road foot. more
11/21/2011 9:59:36 AM
Thule Crossroad Roof Rack Installation - 2010 Toyota Highlander- Video
Today we have a 2010 Toyota Highlander and we will be testing fitting a Thule roof rack. Well be using the 50 inch square load bars and the cross road feet. We already have our load bar assemblies put together and now were reading to mount them up on our vehicle. When positioning the front load bar you need to check three things, You need to make sure that the bar is over hanging evenly on both sides of the vehicle, you need to make sure that the center line triangle on the side of the cross road foot is on the center of the factory side rails, and finally you need to make sure that the load bar is running perpendicular to your raise side rails. To do this well measure from the fix point of the side rail on both sides of the vehicle, to the leading edge of the cross road foot. Well make sure that our measurement is even on both sides and then well know that our load bar is perpendicular. more
11/7/2011 11:33:51 AM
