Rhino-Rack Euro Square Roof Rack Installation - 2012 Nissan Sentra- Video
Today on our 2012 Nissan Sentra we're going to be test fitting the Rhino Rack 2500 Series Roof Rack with Euro Square Bars 49 Inches Long in Black, part number ds126b also using part number dk172. We have our roof rack already assembled according to the instructions so we're ready to place it on top of our roof. We'll place the front half of our roof rack system onto our Sentra.To make sure we have it in the right location we need to measure 250 millimeters from the door jamb of the front door and the rear door to the center of our foot pack. We need to do this on both the driver and passenger side of the vehicle. Once we have it in the correct location we can then use the Allen key tool to tighten down each foot. We'll make our way back and forth from driver side to passenger side as we tighten to make sure we get the best fit and that we do not lose position.Once we have this crossbar secured we can then open the rear doors, place our bar on top of the roof. more
6/13/2013 10:25:09 AM
Rhino-Rack Heavy-Duty Roof Rack Installation - 2012 Nissan Sentra- Video
Today on our 2012 Nissan Sentra well be test fitting the Rhino Rack 2500 Series Roof Rack with heavy duty square bars 50 inches long, part number dh1250s, and also using part number dk172. Our roof rack system is already assembled according to the instructions. Well place half of our roof rack system onto the front part of our roof. To ensure that we have it in the right location, we need to measure 250 millimeters from the door jamb of the front and rear door to the center of our foot pack. Well do this on both sides of the vehicle. Once we have it in the correct location we can then use the Allen key to secure it into position. more
6/11/2013 10:32:27 AM
Rhino-Rack Aero Roof Rack Installation - 2012 Nissan Sentra DA126- Video
Today, on our 2012 Nissan Sentra, we will be test fitting the Rhino Rack 2500 Series Roof Rack with Aero Crossbars 50 inches long and silver, part number DA-126, also using part number DK 172. Our roof rack system has already been assembled, according to the instructions. We will begin the test fit by opening both doors at the front of the vehicle. We will set our crossbar onto the front part of our Sentra. To ensure that we have it in the right location, we need to measure 250 mm from the door jams of the rear door and the front door to the center of our foot pack. We will do this on both sides. more
6/11/2013 9:36:17 AM
Rhino-Rack Aero Roof Rack Installation - 2012 Nissan Sentra- Video
Today on this 2012 Nissan Sentra, we're going to be test fitting the Rhino-Rack 2500 Series Roof Rack using part numbers DA126B and DK172. We already have the crossbar assemblies put together, so now we're ready to mount them onto the vehicle. The first thing we need to do is open both the front doors. To position our front bar, we need to measure 250 millimeters from the center of the door gap between the front and rear door. Once we have our position set, we can go ahead and tighten on the front crossbar assembly. We want to be sure we do the measurement on both sides of the vehicle and that we move back and forth from passenger side to driver side as we tighten. This helps us tighten down the system evenly, and helps us make sure that we do not lose our position. With the front bar tightened down, we're ready to move on to the rear. more
6/11/2013 4:37:06 AM
