Thule Roof Rack Review - 2016 Nissan Quest- Video
Today on our 2016 Nissan Quest, we're going to be test fitting the Thule Roof Rack System, consisting of part numbers THLB58, these are the Thule Square Load Bars, 58" long, and part number TH450, these are the Crossroad Roof-Mounted Foot Packs, specifically for your factory raised side rails. We already have the front one installed. It's a nice, sturdy bar, along with the rear load bar. It has a carry capacity of 165 pounds, although you want to double check with your vehicles manual to make sure it can withstand that weight on the roof, as well as the bars. We already have the front one installed, let's go ahead and show you how the rear one installs. It's very easy and very quick, and these can fit on multiple vehicles. We'll take our Crossroads foot pack, make sure it's in the open position, and this portion here will slide on to the end of our load bar. more
10/20/2016 12:16:10 PM
Inno Roof Rack Review - 2016 Nissan Quest- Video
Today in our 2016 Nissan Quest, we're going to be test-fitting the Inno Roof Rack System consisting of part numbers, INXB115-2, these are the Inno Area Crossbars, 45 inches long, and part number INXS-100, these are the Inno Flush Feet for Aero Crossbars, particularly for raised side rails like you see here. We already have the front one installed and you can see the shape of the bar has a nice aerodynamic shape to it and that's going to cut down wind noise and drag while you're driving. We have these end-caps here that are lockable so your roof rack will be secure to your side rails once it's installed. This, along with the rear cross bar, have a carrying capacity of 165 pounds. Although, you want to double-check with your manufacture's instructions to make sure your roof can withstand that kind of weight. We have the front one installed. Let's go ahead and show you how the rear one gets put together. We already have it partially assembled on our table here. more
10/14/2016 9:16:18 AM
Thule Roof Rack Review - 2016 Nissan Quest TH450R- Video
Today on our 2016 Nissan Quest we're going to be test fitting the Thule Roof Rack System. Consisting of part numbers THARB53 these are the AeroBlade Load Bars and these also come in black as part number THARB53B, and then part number TH450R and these are the Rapid Crossroad Foot Packs that mount around your factory raised side rails. Now, we already have the front one installed and as you can see, the bar itself has a nice aerodynamic shape to it and that's going to cut down wind noise and drag while you're driving. Along with the rear load bar installed, this does have a carrying capacity of 165 pounds although, you want to double check with your vehicles manual to make sure they can withstand that weight on the roof. Let's go and show you how the rear one goes into place. We already have it partially assembled on our table here. We'll take the one foot pack here, and you'll see it has this T shaped bracket here at the top. more
10/11/2016 10:06:39 AM
Thule Crossroad Roof Rack Installation - 2006 Nissan Quest- Video
Today we have a 2006 Nissan Quest and we will be test fitting a Thule Crossroad roof rack. We already have our load bar assemblies put together with our 58 inch load bars and the Crossroad feet, so now we are ready to mount them up on our vehicle. We are going with slightly longer load bars than needed today because of the accessories we will be using on top. We will measure from front to back to make sure that our front load bar is perpendicular to the side rails, and we will also make sure that the bars are overhanging evenly on both the driver and passenger sides. Once we have our crossbar assembly positioned where we want it, we can begin tightening it down. 0:34 more
9/28/2011 10:34:57 AM
Rhino Rack Roof Rack Installation - 2006 Nissan Quest- Video
Today on this 2006 Nissan Quest we are going to be installing a Rhino Rack roof rack part number SXB3. Once the crossbars are assembled we are ready to go ahead and set them up on the factory raised side rails. We will lay the front crossbar on the raised side rails and make sure that it is running perpendicular to the raised side rails and also that it is overhanging evenly on either side of the vehicle. Once we have it positioned where we want it we can go ahead and use the included allen key to begin tightening the rack down. We will move back and forth from the driver side to the passenger side to make sure we tighten the rack down evenly. Once we have both sides of the crossbar tightened down we can install our locking endcaps. Next we will fit the rear crossbar onto the side rails in the same manner. :42 more
9/13/2011 10:57:21 AM
Filter Videos
Filter Videos
