bing tracking image

2013 Mazda 5 Roof Rack Installation And Review Videos

     

Yakima Control Tower Roof Rack Installation - 2013 Mazda 5- Video

Yakima Control Tower Roof Rack Installation - 2013 Mazda 5

Today in our 2013 Mazda 5 we are going to be testing the Yakima control tower roof rack system with the 58-inch bar, part number Y00409, Y00214, Y00233 and Y00233 again. To begin our test fit we remove the black cover over our fixed mounting points and check the threads to be sure they are clean. We'll not take one of foot packs and place it by each of the four mounting locations. We'll now grab our four bolts on these bolts we'll want 3 regular washers and one black rubber washer. The rounded part will be facing down. We'll place it down through the foot of our rack, and thread it in to our fixed mounted locations. We'll snag it down to be sure we have no movement but we won't fully tightened it yet. more


Watch Video

5/27/2014 11:01:29 AM



Yakima Control Tower Roof Rack Installation - 2013 Mazda 5 Y00214- Video

Yakima Control Tower Roof Rack Installation - 2013 Mazda 5 Y00214

Today on our 2013 Mazda5 we're going to be test fitting the Yakima Control Towers Roof Rack System using the 48" round bars, part numbers Y00408, Y00214, Y00233, and Y00233 again. To begin our test fit we'll remove the black covers over our fixed mounting points and check the threads to be sure they're clean. We'll now take one of our foot packs and place it by each of our four mounting locations. We'll now grab our four bolts. On these bolts we'll want three regular washers and one black rubber washer. The rounded part will be facing down. more


Watch Video

5/27/2014 11:00:26 AM



Thule Podium Roof Rack Installation - 2013 Mazda 5- Video

Thule Podium Roof Rack Installation - 2013 Mazda 5

Speaker: Today on our 2013 Mazda5, were going to be test fitting the Thule Podium Roof Rack System using the 50 inch square bars. Well use part numbers THLB50, TH460 and THKIT3080. With our rack assembled according to the manufacturers instructions, well begin our test fit by removing the black plastic covers located over our fixed mounting points and thread in one of the silver studs. Well do this on all 4 locations. Well then take our 3 mm Allen bolt and tighten them down. Well then grab the front half of our rack and place it over our studs. I want to be sure that they go through the center of our foot pack and come out of the top. more


Watch Video

5/21/2014 12:31:02 PM



Thule AeroBlade Podium Roof Rack Installation - 2013 Mazda 5- Video

Thule AeroBlade Podium Roof Rack Installation - 2013 Mazda 5

Today on our 2013 Mazda5, we'll be test fitting the Thule Podium Roof Rack System using part numbers THARB47, TH460R, and THKIT3080. We'll begin our test fit by removing the black plastic tabs that cover up our mounting locations. We'll take our bolts from our fit kit and screw them into the fixed mounted holes. As we do this, we can go ahead and place the spacer over each bolt and tighten each one down using an Allen key. With out roof rack assembled according to the instructions, we'll go ahead and place the podium feet over top of our bolts. We'll secure those in place by installing our nuts and tighten them down using the included wrench. We'll grab our front load bar and place it onto the front part of our roof. In doing this, we want to go ahead and make sure that we have even bar overhang on each side of the vehicle. more


Watch Video

5/21/2014 12:30:10 PM



  1