Inno Aero Crossbar Installation - 2011 Kia Sorento- Video
Speaker 1: Today on our 2011 Kia Sorento, we're gonna be test fitting the Inno Aero roof rack system. That's gonna be part numbers, INXB130-2. And that's gonna be our 51 inch crossbars up top. And then we have our Inno through feet kit. Which is what's connecting our cross bars to our factory side rails. And that's gonna be part number INXS150.As you can see, these crossbars have a nice aerodynamic shape to them. more
8/13/2018 2:07:12 PM
Inno Roof Rack Review - 2011 Kia Sorento- Video
Speaker 1: Today on our 2011 Kia Sorento we're gonna be testing the Inno Square Bar Roof Rack System. That's gonna be Part Numbers INB127. That's gonna be our 50" square bars right up top here. The other part is gonna be our Inno Feet that's gonna be Part Number INFR. This roof racking system can carry a wide variety of accessories such as, bike racks, cargo carriers, cargo racks, anything to that nature. Because of the square design you are going to have some wind noise, and some drag while you're driving, but you can purchase a ferring 00:00:36 that'll act as a wind deflector. more
8/8/2018 4:07:11 PM
Rhino Rack Roof Rack Review - 2011 Kia Sorento- Video
Speaker 1: Today on our 2011 Kia Sorento, we're going to be testing the Rhino-Rack Vortex Aero Roof Rack System. That's going to consist of part numbers RRVA118B-2. That's going to be our 46-inch crossbars we have up top. Then we're going to have our SX Series Legs, which is going to be part number RRSX009. As you can see, these bars also have a elliptical design, so it's going to help cut down on wind noise and drag while you drive. These crossbars also come in silver under part number RRVA118S-2.Now, if we look at our SX Series Legs, we're going to see it's kind of a clamp-style system where it basically sandwiches our factory side rails. more
8/8/2018 8:48:00 AM
Inno Roof Rack Review - 2011 Kia Sorento INXB108-2- Video
Speaker 1: Today on our 2011 Kia Sorento we're going to be test fitting the Inno Aero Roof Rack System. That's going to consist of part numbers INXB108-2. And the part number's going to be our 42 inch cross bars that we have on top. As you can see they have a nice aerodynamic shape to them. That's going to help cut down on wind noise and drag while you're driving. Our other part is going to be our Inno Flush Feet System, and ;ts going to be part number INXS100.So, how this is installed, we have this rubber coated steel strap that wraps under out factory side rail and comes up and tightens down, or hooks in to our flush feet system and is tightened down so that it's secured to our side factory side rails. more
8/8/2018 8:47:35 AM
Inno Aero Bar Installation - 2011 Kia Sorento- Video
All right. Today on this 2011 Kia Sorento, we're going to show you an Inno Aero Bar in sand-brushed black color, part number INXB108. With this part number, you get 1 Aero Bar, like you see here, so if you need 2, you need to order 2 of same part number. It's actually shaped a little bit like a wing. This is a leading edge right here. It goes towards the front of the vehicle. more
5/22/2015 10:36:32 AM
Thule AeroBlade Crossroad Roof Rack Installation - 2011 Kia Sorento- Video
Today on our 2011 Kia Sorento we'll be doing a quick test fit of the Thule Rapid Crossroads Roof Rack System, using part numbers THARB53 and TH450R. The crossbar is also available in black as part number THARB53B. We'll begin our test fit by installing the front bar. We'll need to take the front load bar and place up onto the front of our roof. We'll need to bring the rubber-coated steel straps around the underside of the cross rails and bring it up and hook it into the foot pack. Note that we will need to remove the end cap first. With the strap inserted into the end of the foot pack, we can use the included tool to tighten it down. more
10/5/2014 10:02:13 AM
Thule AeroBlade Edge Roof Rack Installation - 2011 Kia Sorento- Video
Today on our 2011 Kia Sorento, we'll be test fitting the Thule AeroBlade Edge Roof Rack System for factory raised side rails, part number TH7502-TH7503. We'll begin our test fit by placing our first bar onto the front of our roof. There's a little line where the raised side rail connects to the roof and the parallel bar connects to the fixed point. There is a crease in which we'll set up our next tube, making sure the front bar is perpendicular to the raised side rails of our Sorento. With this done, we can take the rubber-coated steel straps on number three and insert it into the bottom portion of the blade. We'll then wrap the strap around the raised side rail bringing it back up into the holes of the strap, placing it into the holes at the top portion of the blade. more
9/16/2013 8:13:54 AM
Thule Crossroad Roof Rack Installation - 2011 Kia Sorento- Video
Today on our 2011 Kia Sorento, we'll be test fitting the Thule Crossroads Roof Rack System using part numbers THLB50 and TH450. This roof rack system is also available as a kit with locks as part number TH450-50. We'll begin our test fit by placing the front bar onto the front of our roof. Now there is a crease in which we are going to use to help us position the front bar. We'll use the crease as a guide to make sure that our feet are right next to it, which will ensure our bar is perpendicular to the rear side rails. With the front bar in place, we can pop off the end caps, bring the rubber-coated steel straps around the rail and hook them into the connection points. more
9/13/2013 1:52:50 PM
Thule AeroBlade Crossroad Roof Rack Installation - 2011 Kia Sorento TH450R- Video
Today, on our 2011 Kia Sorento, we'll be test fitting the Thule Rapid Crossroads roof rack system, using part numbers THARB47 and TH450R. We'll begin our test fit by placing the front bar onto the front of our race side rails. There is a crease in which we are going to use to help us position the front bar. We'll use the crease as a guide to make sure that our feet are right next to it, which will insure our bar is perpendicular to the race side rails. With our front bar in place, we can pop off the end caps and bring the rubber coated steel straps around the underside of the rail and hook them into connection points. We'll then use the included tensioning tool to tighten down the black bolt to tighten down the straps up against the rail. We'll then repeat the same process for the other side. We'll now place our second bar onto the rear of our roof. We'll then measure the load bar spread. more
9/13/2013 1:49:54 PM
