Rhino-Rack Euro Square Roof Rack Installation - 2012 Hyundai Elantra- Video
Today on our 2012 Hyundai Elantra, we're going to be taking a look at the Rhino-Rack 2100 Series Roof Rack, consisting of part numbers DS126B, that's going to be the actual roof rack with the 49 inch long bars, and the 2500 series legs, and part number DK301, this is the custom fit kit for the Hyundai Elantra. The Rhino-Rack roof rack system is great for carrying a wide variety of objects on your roof and possibly freeing up some space in your car. Another nice feature about this roof rack system are these locking end caps here, so once you have this installed, it's going to be secured to your roof. The bars are nice and sturdy and have a carrying capacity of 165 pounds once you have them installed, although you always want to double check with your vehicle's manual to make sure your roof can withstand that weight. Now that we've gone over some of the features of the roof rack system, let's go ahead and show you how it installs. We have our front one installed, let's go ahead and finish up on the rear here. We'll first flip our bar upside down and get the proper measurement for our strips here. Now, to adjust these along our bar here, we're going to have to loosen up this screw using the included torquing tool. more
2/10/2017 12:17:06 PM
Rhino-Rack RS 2500 Vortex Aero Roof Rack Review - 2012 Hyundai Elantra- Video
Today in our 2012 Hyundai Elantra, we're going to be test fitting the Rhino-Rack RS 2500 series roof rack, part number RRRS314B. The Rhino-Rack 2500 series RS roof rack is great for carrying a wide variety of accessories and freeing up space in your car. It's very easy to install, and it just clamps onto your naked roof. It has these rubber strips here at the top, and that, coupled with the aerodynamic bar itself, will actually cut down wind noise and drag while you're driving. It also enables you to use T-Track accessories with this roof rack. It also has locking end caps on all of the legs, so when this is installed onto your roof, it's actually going to be secured to your roof as well. more
1/30/2017 11:48:22 AM
Rhino-Rack Aero Roof Rack Installation - 2012 Hyundai Elantra- Video
Today on our 2012 Hyundai Elantra, we'll be test fitting the Rhino-Rack 2500 Series roof rack with Aero crossbars, 46" long, in black, part number DA118B. We'll also be using the Custom DK clamps and pads for the Rhino-Rack 2500 Series, part number DK010. With our roof rack assembled according to the instructions, we'll begin our test fit by opening both of our front doors. We'll grab our front bar and place it onto the front part of our roof. To ensure that we have this in the correct location, we need to measure 230 mm from the center of our door jamb back towards the front of our vehicle. This will be the location of the center of our leg foot plate. more
7/16/2013 5:41:19 PM
