bing tracking image

Hitch Fabrication Parts Installation And Review Videos


Review of CURT Hitch Fabrication Parts - Raw Shank - D31- Video

Review of CURT Hitch Fabrication Parts - Raw Shank - D31

Hi, Steve here with etrailer.com. Today we're gonna look at the CURT solid steel two inch hitch bar with the raw finish 14 inches long. Now as you can see with this raw bar here, you can create your own hitch accessory. It's very strong, durable, it's made of solid steel, and it fits a two inch by two inch receiver. It is constructed of hot rolled steel for superior strength, and it has rounded corners, which is gonna make it a lot better for you and greater versatility as far as sliding in and out of the hitch itself. Overall, we've got 14 inches long and it is a two inch by two inch square, and obviously it comes with the pre-drilled hole. more


Watch Video

2/13/2024 3:15:31 PM



Review of CURT Hitch Fabrication Parts - Chain Loop - E950- Video

Review of CURT Hitch Fabrication Parts - Chain Loop - E950

Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this raw steel weld-on safety chain loop for trailer hitch receivers. Has a 10,000 pound weight capacity. Now, this trailer hitch safety chain loop can be welded to other hitch fabrication parts to create a nice secure hookup for your trailer safety chains. Does have a raw finish to it, which makes it ready to be welded on and it can be painted in the color of your choosing. more


Watch Video

1/2/2024 1:45:04 PM



Review of Buyers Products Hitch Fabrication Parts - Bolt-On 2-1/2 Inches Reciever Tube - BP82FR- Video

Review of Buyers Products Hitch Fabrication Parts - Bolt-On 2-1/2 Inches Reciever Tube - BP82FR

Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this bolt-on receiver tube. This is a two and a half inch receiver hitch, that will allow you to bolt this onto your hitch plate with a standard pintle hook mounting holes. This is a sturdy steel construction, so it is going to provide a 20,000 pound towing weight capacity and a 2000 pound max tongue weight. It's got this black powder coat finish on it to help resist rust and corrosion. And just to give you a few measurements here, you can see this is right at five inches wide, is about seven inches tall. more


Watch Video

4/7/2023 7:02:43 AM



Review of CURT Hitch Fabrication Parts - Receiver Tube - C55NR- Video

Review of CURT Hitch Fabrication Parts - Receiver Tube - C55NR

Hello everybody, this is Jeff at etrailer.com. Today we take a look at this Curt 18 inch long solid steel, three-inch hitch receiver tube in the raw finish. Now this Curt 18 inch long steel receiver tube can be used to extend the reach of your receiver or even a create a piece of custom towing equipment. The construction on this is a nice hot rolled steel for superior strength. If you notice, it is designed with rounded corners for greater versatility and it is designed to accept a three inch by three inch shank. If you notice on the outer edge here, it has a half inch reinforcing collar all the way around, to give an extra strength. more


Watch Video

3/22/2023 2:16:56 PM



Review of CURT Hitch Fabrication Parts - Receiver Tube - C23NR- Video

Review of CURT Hitch Fabrication Parts - Receiver Tube - C23NR

Hello everybody, this is Jeff at etrailer.com. Today I'm gonna take a look at this Curt 12-inch long solid steel, three inch hitch receiver tube in the raw finish. Now this Curt 12-inch long steel receiving tube can be used to extend the reach of your receiver or even to create a piece of custom towing equipment. It is constructed of a hot blown steel for superior strength. And what's nice if you look close, it's designed with rounded corners for greater versatility and it is designed to accept a three inch by three inch shank. Does have a nice half inch reinforcing collar all the way around the outside here for extra strength. more


Watch Video

3/22/2023 1:25:27 PM



Review of Reese Hitch Fabrication Parts - Receiver Tube - 11029- Video

Review of Reese Hitch Fabrication Parts - Receiver Tube - 11029

Hello, everybody. This is Jeff at etrailer.com Today, we're gonna take a look at this Reese 18-inch long 2 1/2 inch trailer hitch receiver fabrication part with a raw finish. Now this part is designed to be used in fabricating a 2 1/2 inch hitch receiver when there's a receiver that's not available for your application. This one here is made of a cold formed structural tubing. You can see right here, it has a welded, forged collar on it and this is in a raw unpainted finish. This is sized and punched to fit most common trailer hitch ball mounts or utility ball mounts. more


Watch Video

12/2/2022 10:24:40 AM



Review of Buyers Products Hitch Fabrication Parts - Hitch Plate - 3371809040- Video

Review of Buyers Products Hitch Fabrication Parts - Hitch Plate - 3371809040

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Buyers Products fabricator's hitch plate. Now this fabricator's hitch plate'll let you build your own hitch plate to meet your specific vehicle needs. This hitch plate is commonly used on vehicles without a rear bumper like on dump trucks or tow trucks. Basically this hitch plate is welded to the frame using the included two weld-on gussets right here, and it will also include these two weld-on 5/8 inch size forged D-rings with the mounting brackets to attach 'em to the plate. This is a half inch thick plate, features multiple pintle hook mounting positions and the distance between these mounting holes for your pintle hook mounting plate from center to center, if we go horizontally center to center, 3 3/8 inches, and the holes center to center vertically, are 1 3/4 inches apart. more


Watch Video

6/3/2022 11:53:00 AM



Review of Shocker Hitch Hitch Fabrication Parts - Weld On Vertical Channel Trailer Mount - SHK37MR- Video

Review of Shocker Hitch Hitch Fabrication Parts - Weld On Vertical Channel Trailer Mount - SHK37MR

Hi everybody. Andy here with etrailer.com. And today, we're gonna take a brief look at this Shocker weld-on vertical channel trailer tongue mount. This heavy-duty weld-on vertical channel is going to convert your existing A-frame trailer to accept vertical channel couplers. Just some overall measurements for you. This vertical channel is sitting right at 12 inches long overall. more


Watch Video

4/18/2022 11:08:28 AM



Review of Buyers Products Hitch Fabrication Parts - 3/4" Thick Fabricators Hitch Plate - 3371809027A- Video

Review of Buyers Products Hitch Fabrication Parts - 3/4

Hi, everybody. Andy here with etrailer.com And today we're gonna take a look at this Buyer's Products fabricators hitch plate. Now this fabricator hitch plate is going to let you build your own hitch plate to meet your own specific vehicle and needs. These hitch plates are commonly used on dump trucks and other heavy duty vehicles that do not have a rear bumper. It is welded to the frame using these two included weld on gussets for added support. And it is recommended that you have an experienced welder weld and install this for you on your vehicle. more


Watch Video

3/18/2022 3:04:55 PM



Review of Buyers Products Hitch Fabrication Parts - Fabricators Hitch Plate - 3371809043- Video

Review of Buyers Products Hitch Fabrication Parts - Fabricators Hitch Plate - 3371809043

Hi, everybody, Andy here with etrailer.com, and today we're gonna take a look at this Buyer's Products fabricator's hitch plate. Now this fabricator's hitch plate will let you build your own hitch plate to meet your specific vehicle and needs. And these hitch plates are commonly used on dump trucks or heavy-duty vehicles that do not have a rear bumper. It is welded to the frame of your vehicle using these two included weld-on gussets for added support, and it is recommended to use an experienced welder to weld this plate to your vehicle. It also includes these two 1-inch forged D-rings that you could weld to the plate in a position that works best for you. And it features multiple pintle hook mounting holes and the distance between those mounting holes center to center horizontally is gonna be 3 3/8 inches, and then vertically center to center, it's gonna be 1 3/4 inches and those are standard mounting holes, so just so you're aware of that. more


Watch Video

3/18/2022 2:16:34 PM



Review of CURT Hitch Fabrication Parts - Shank - D33- Video

Review of CURT Hitch Fabrication Parts - Shank - D33

Hello, everybody. This is Jeff at etrailer.com. Today we'll take a look at this CURT 18 inch long solid steel two inch hitch bar with the raw finish. Now with this piece you'll be able to create your own hitch accessory. It's a strong, durable, solid steel hitch bar. It is designed to fit two inch by two inch hitch receivers. more


Watch Video

3/17/2022 8:43:37 AM



Review of Shocker Hitch Hitch Fabrication Parts - Trailer Tongue Vertical Channel Weld On - SHK95RR- Video

Review of Shocker Hitch Hitch Fabrication Parts - Trailer Tongue Vertical Channel Weld On - SHK95RR

Hi, everybody, Andy here with etrailer.com, and today we're taking a look at this trailer tongue vertical channel weld-on adapter. Now, this weld-on adapter converts your existing 50-degree A-frame trailer to accept vertical channel couplers. Now, the adapter has a standard jack hole, as you see here, and there are six holes to accommodate most vertical channel couplers. This does come fully welded, and this'll be ready for your application. Welding is required to install this. And let me give you some measurements here. more


Watch Video

1/10/2022 12:59:07 PM



Review of Buyers Products Hitch Fabrication Parts - Hitch Plate - 3371809042- Video

Review of Buyers Products Hitch Fabrication Parts - Hitch Plate - 3371809042

Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this Buyers Products fabricators hitch plate. This fabricators hitch plate will let you build your own hitch plate to meet your specific vehicle needs. These hitch plates are commonly used on dump trucks or heavy-duty trucks that have no rear bumper. This is a 5/8-inch-thick hitch plate. more


Watch Video

6/4/2021 2:27:35 PM



Review of Buyers Products Hitch Fabrication Parts - Receiver Tube - 3371804055- Video

Review of Buyers Products Hitch Fabrication Parts - Receiver Tube - 3371804055

Jeff Hello, everybody. This is Jeff at etrailer.com. Today, I'm gonna take a look at the Buyers Products bolt on two inch receiver tube. With the mounting plate. Now this bolt on receiver tube will bolt directly into any hitch plate that has a standard pin to hook hole pattern. So this will allow flexibility in switching from a pintle hook to a ball hitch towing. more


Watch Video

3/9/2021 12:26:25 PM



Review of Curt Hitch Fabrication Parts - Curt - C49511- Video

Review of Curt Hitch Fabrication Parts - Curt - C49511

Today, we're going to take a look at the Curt 18-inch Long Combo Bar with the 2.5-inch Trailer Hitch Receiver Opening in an unpainted raw finish. Now this combo bar is used to fabricate a hitch receiver, where a bolt on hitch receiver is not available. This is designed to accept any 2.5-inch by 2.5-inch ball mount shank. Does have this nice half-inch forged collar reinforcement around the front here for increased strength. And as I mentioned, it is an unpainted raw finish, so it allows for immediate welding.Does have a pre-drilled five-eighths inch diameter hitch pin hole. Does require a hitch pin and clip to hold your ball mount in place, that is sold separately. more


Watch Video

10/10/2019 12:03:22 PM



Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT255808 Review- Video

Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT255808 Review

Speaker 1: Today we're going to take a look at an 8" long weld-on 2 1/2" plain receiver tube. Now, this weld-on receiver tube is available in a variety of lengths, dimensions, and finishes to match your towing needs. This one is an 8" long version. This 2 1/2" inch receiver tube features this 3/4" wide solid stress collar opening. The 8" tube contains a 5/8" diameter hitch pin hole, and it can achieve a rating of up to 20,000 lbs. And also what you can do is, you can cut this unfinished tube to a custom length if needed. more


Watch Video

5/17/2018 11:44:07 AM



Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT255818 Review- Video

Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT255818 Review

Speaker 1: Today we're taking a look at a 2.5" receiver tube. Now, the 2.5" measurement is the hitch opening, so the opening measures 2.5" tall, by 2.5" wide. This unit is made from a carbon steel construction with a nice raw finish, so that way you can prime and paint it to match whatever it is that you're installing this on. What you're going to do is designs allow you to create or fabricate a piece of custom towing equipment. It is a weld-on installation. The overall length, measuring edge to edge gives us a measurement of 18". more


Watch Video

5/3/2018 1:50:13 PM



Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25836B Review- Video

Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25836B Review

Speaker 1: Today we're taking a look at a two inch receiver tube. The two inch receiver tube features a carbon steel construction and it has a really nice black, powder coated finish on it to resist rust and corrosion. The unit is designed to allow you to create or fabricate a piece of custom towing equipment. Taking a look at the overall length, measuring edge to edge is around 36 inches, maybe 36-1/4, right in that area. This receiver tube has a 5/8 inch diameter hitch pinhole located right here, which will accept a standard 5/8 inch diameter pin or hitch lock to secure your hitch mounted items and accessories inside the receiver tube. The receiver tube opening measures two inches by two inches, and this unit features a maximum gross trailer weight capacity of up to 20,000 pounds. more


Watch Video

5/3/2018 1:00:14 PM



Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25848B Review- Video

Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25848B Review

Speaker 1: Today, we're taking a look at a 2" receiver tube. Now, when we say 2", what we mean is that this receiver tube offers a 2" x 2" opening.The 2" receiver tube features a carbon and steel construction and it has a really nice black powder coated finish on it to resist rust and corrosion.It has the welded on collar right here at the hitch opening. This unit is designed to allow you to create or fabricate a piece of custom towing equipment.We're going to take a measurement of the overall length. So, from the very front to the very back, measures around 48" long. It's a weld on installation. The receiver tube right here has a 5/8" diameter hitch pin hole, which will accept a standard 5/8" diameter pin or hitch lock, to secure your hitch mounted items and accessories.Inside the receiver tube, the maximum gross trailer weight capacity is up to 20,000 pounds and the measurement we have from the front of the collar to the center of the hitch pin hole is two and a half inches.That's going to do it for today's look at the 48" long, 2" receiver tube.. more


Watch Video

5/3/2018 12:25:15 PM



Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT255812 Review- Video

Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT255812 Review

Speaker 1: Today we're going to take a look at the 12 inch long, two and a half inch by two and a half inch, raw finish, weld-on receiver tube. Now these weld-on receiver tubes are available in a variety of lengths, dimensions and finishes to match your towing needs. This part number is the 12 inch long version. Now this is a two and a half inch by two and a half inch receiver tube. And that's measured internally. Features a nice cast steel collar, has a solid stress collar opening.This 12 inch long tube contains a 5/8 inch diameter hitch pinhole and it can achieve a rating up to 20,000 pounds. more


Watch Video

5/3/2018 12:20:11 PM



Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25806 Review- Video

Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25806 Review

Speaker 1: Today we're gonna take a look at the 6" long, 2" x 2", raw finish, weld-on receiver tube.Now these weld-on receiver tubes are available in a variety of lengths, dimensions and finishes to match your towing needs.This part happens to be the 6" long version. Now this is a 2" x 2" receiver tube. The internal dimensions are 2" x 2".It features a nice cast steel collar, solid stress collar opening. This 6" long tube contains a 5/8" diameter hitch pinhole, and it can achieve a rating of up to 20,000 pounds. It's a carbon steel construction, and it is a raw finish. And it does go all the way through. more


Watch Video

5/3/2018 12:10:14 PM



Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25818B Review- Video

Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25818B Review

Speaker 1: Today we are going to take a look at the 18 inch long, two inch by two inch black weld on receive tube. These weld on receiver tubes are available in a variety of lengths, dimensions and finishes to match your towing needs. This part happens to be the 18 inch long version. This is a two inch by two inch receiver tube. The internal dimensions are two inches by two inches. It features a nice cast steel collar and a solid stress collar opening. more


Watch Video

5/3/2018 11:40:13 AM



Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25814B Review- Video

Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25814B Review

Speaker 1: Today we're going to take a look at the 14 inch long, 2 inch by 2 inch black weld-on receiver tube. Now these weld-on receiver tubes are available in a variety of lengths, dimensions and finishes to match your towing needs. This part happens to be the 14 inch long version, has the inside dimensions of 2 inches by 2 inches. Features a nice cast steel collar, solid stress collar opening.This 14 inch long finish tube also has a 5/8 inch diameter hitch pinhole and it can achieve a rating up to 20000 pounds. It's a nice carbon steel construction, has a nice black powder coat finish to it. And if I turn it, you can see it goes all the way through, it is open on both ends.Now, just to measure it for you. more


Watch Video

5/3/2018 11:30:12 AM



Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25812B Review- Video

Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25812B Review

Speaker 1: Today we're gonna take a look at the 12-inch-long two inch by two inch black receiver tube. This weld-on receiver tube is available in a variety of lengths, dimensions, and finishes to match your towing needs. This part number happens to be the 12-inch-long version. This is a two-inch by two-inch receiver tube. The inside opening is two inches by two inches. Features a nice cast steel collar, solid stress collar opening. more


Watch Video

5/3/2018 11:25:16 AM



Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25810B Review- Video

Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25810B Review

Speaker 1: Today, we're going to take a look at the 10 inch long two inch by two inch black receiver tube. Now, the weld on receiver tubes are available in a variety of lengths, dimensions and finishes to match your towing needs. This part number happens to be the 10 inch long version. This is a two inch by two inch hitch receiver tube. Features a nice cast steel collar and a solid stress collar opening. This 10 inch long finish tube will contain a 5/8 inch diameter hitch pin hole and it can achieve a rating up to 20,000 pounds. more


Watch Video

5/3/2018 11:15:12 AM



Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25808B Review- Video

Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25808B Review

Speaker 1: Today we're going to take a look at the eight inch long, two inch by two inch black receiver tube. Now these well done receiver tubes are available in a variety of lengths, dimensions and finishes to match your towing needs. This part is the eight inch long version. This is a two inch by two inch receiver tube. Features a nice cast steel collar and a solid stress collar opening.This is eight inches long, it's a black finished tube contains a 5/8 inch diameter hitch pinhole and it can achieve a rating up to 20,000 pounds. This tube is a carbon steel construction, black powder coat finish. more


Watch Video

5/3/2018 11:10:12 AM



Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25806B Review- Video

Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25806B Review

Speaker 1: Today we're gonna take a look at the six inch long, two inch by two inch, black receiver tube. This is a Weld-On Receiver Tube. It's available in a variety of lengths, dimensions and finishes to match your towing needs. This part number happens to be the six-inch long version. This is a two inch by two inch receiver tube. It features a cast-steel collar. more


Watch Video

5/3/2018 11:00:13 AM



Buyers Products Hitch Fabrication Parts - Hitch Plate - 3371809035A Review- Video

Buyers Products Hitch Fabrication Parts - Hitch Plate - 3371809035A Review

Speaker 1: Today we're taking a look at a hitch plate with pintle mount. The hitch plate features multiple pintle hook mounting positions. It features the two forged D-rings and the pre inaudible 00:00:13 hole that fits most trailer electrical connectors. Now, this offers four pintle hook mounting positions, so position one, two, three and four so we've got a five-hole design on each side for a four-position mount. Those holes are separated on center side to side by 3-3/8 inches. Up and down they're separated on center by 1-3/4 inches and the D-rings on the unit are 5/8 of an inch thick.Now, the hitch plate is pre-fabricated and ready to use. more


Watch Video

5/2/2018 3:45:14 PM



Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25824B Review- Video

Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25824B Review

Speaker 1: Today we're going to take a look at the 24-inch long black two inch receiver tube. Now these weld on receiver tubes are available in a variety of lengths, dimensions and finishes to match your towing needs. This part number happens to be a 24-inch long, black finish tube, contains a 5/8 inch diameter pin hole and can achieve a rating of up to 20,000 pounds. This two hitch receiver tube features a half inch cast steel collar around the end here and gives you a solid stress collar opening. It's make of a carbon steel construction, has a nice black powder coat finish. Maximum gross trailer weight capacity is 20,000 pounds and the measurement I want to give you is from the center of the hitch pin hole to the edge of the tube. more


Watch Video

5/1/2018 2:35:12 PM



Gen-Y Hitch Hitch Fabrication Parts - Receiver Tube - 325-GH-003 Review- Video

Gen-Y Hitch Hitch Fabrication Parts - Receiver Tube - 325-GH-003 Review

Speaker 1: Today we're taking a look at the Gen Y weld on receiver tube. Now this receiver tube allows you to fabricate your own receiver hitch. The opening, right here, is designed for two inch hitch accessories, so that opening measures two inches by two inches. And that features a reinforced 3/4 inch steel collar for added strength and durability.A few measurements I just want to take for you here. I want to go outer edge to outer edge, that's a square design, so whatever we get side to side will be the same up and down. So, edge to edge, this direction, you can see there's about three inches. more


Watch Video

11/20/2017 8:25:16 AM



Gen-Y Hitch Hitch Fabrication Parts - Receiver Tube - 325-GH-002 Review- Video

Gen-Y Hitch Hitch Fabrication Parts - Receiver Tube - 325-GH-002 Review

Speaker 1: Today, we're taking a look at the Gen Y Weld-On Receiver Tube. Now, this receiver tube allows you to fabricate your ow receiver hitch. The opening right here is designed for two inch hitch accessories, so it measures around 2 inches by 2 inches and it features a really heavy duty reinforced 3/4 inch steel collar for strength and durability. The receiver tube outside edge to outside edge square design and the measures about 3 inches by three inches and you can see the inner tube measures about 2 inches by 2 inches and that's just that opening measurement. Really nice welds on the unit. Made from steel. more


Watch Video

11/20/2017 7:45:16 AM



Curt Hitch Fabrication Parts - Receiver Tube - C49480 Review- Video

Curt Hitch Fabrication Parts - Receiver Tube - C49480 Review

Speaker 1: Today we're going to take a look at the Curt Combo Bar with the 2" Trailer Hitch Receiver. This is in a raw finish, and it's 48" long. Now this raw steel hitch receiver is made from steel for maximum strength. It can be used to extend the reach of your receiver, or to create a piece of custom towing equipment. The receiver bar is sized and punched to fit all the common weight distribution hitch ball mounts or utility ball mounts.If you notice on the end right here, it has a forged 1/2" reinforcing collar for increased strength. The tube is crafted with a raw finish so it's ideal for welding. more


Watch Video

9/21/2017 9:50:15 AM



Curt Hitch Fabrication Parts - Shank - D36 Review- Video

Curt Hitch Fabrication Parts - Shank - D36 Review

Speaker 1: Today we're gonna take a look at the Curt 2in solid steel hitch bar with a raw finish, 24in long. Now for the do-it-yourselfer this fabrication steel hitch bar features a standard 2inx2in solid shank and a raw finish. This is constructed from a high strength hot rolled steel and it's designed with rounded corners for easier insertion into the receiver and it is designed to fit all 2inx2in receiver tube openings. If you notice right here, it does have a pre drilled hitch pin hole, has a raw finish which is ideal for welding. This part is made in the USA. Give you a few dimensions on this: total length from edge to edge or end to end is gonna be right at 24in long, the width and the height is gonna be right at 2inx2in. more


Watch Video

9/20/2017 2:11:58 PM



Curt Hitch Fabrication Parts - Shank - D35 Review- Video

Curt Hitch Fabrication Parts - Shank - D35 Review

Speaker 1: Today we're going to take a look at the Curt two inch solid steel hitch bar with the raw finish. It's 22 inches long. For the do-it-yourselfer, this fabrication steel hitch bar features a standard two inch by two inch solid shank and a raw finish. It's constructed from high strength hot rolled steel. It is designed with rounded corners for easier insertion into the receiver. It is designed to fit all two inch by two inch receiver tube openings.If you notice right here, it does have a pre-drilled hitch pin hole. more


Watch Video

9/20/2017 2:01:55 PM



Curt Hitch Fabrication Parts - Receiver Tube - C49524 Review- Video

Curt Hitch Fabrication Parts - Receiver Tube - C49524 Review

Speaker 1: Today we're going to take a look at the Curt 1-1/4" steel hitch bar with the raw finish, 24" in length.Now this is for the do-it-yourselfer. This fabrication steel receiver tubing can be used to extend the reach of your receiver, or to create a piece of custom towing equipment, and is constructed of a hot rolled steel for superior strength, and is designed with rounded corners for greater versatility. Right here, this will accept any 1-1/4" by 1-1/4" ball mount shank. It does have the pre-drilled hitch pin hole, and if you notice they also include the 1/2" reinforcing collar for extra strength. It is a raw finish. It's ideal for welding. more


Watch Video

9/20/2017 12:55:12 PM



Tow Ready Hitch Fabrication Parts - Receiver Tube - 80818 Review- Video

Tow Ready Hitch Fabrication Parts - Receiver Tube - 80818 Review

Today we're going to take a look at the Tow Ready 18 inch combo bar with the 2 inch trailer hitch. This receiver bar is designed for use in fabricating an under vehicle receiver hitch when a receiver is not available. It's made of a cold pharm 1/4 inch thick structural tubing. It is sized and punched to fit all common weight distribution hitch ball mounts or utility ball mounts. It does include the collar, has a nice black powder coat finish over an eco-primer. The overall length on this ... more


Watch Video

5/18/2016 7:35:46 AM



Curt Hitch Fabrication Parts - Receiver Tube - E17 Review- Video

Curt Hitch Fabrication Parts - Receiver Tube - E17 Review

Today we're going to be taking a look at part number E17. This is the Curt Weld-On 2" Receiver which is going to be perfect for custom fabricated hitches. It's designed with the appropriately sized tubes for easy insertion of your ball mount or hitch mount accessories. The receiver opening is going to measure 2" by 2". It's also going to feature the nice forged collar that has a ProDesign as well as a raw finish over the entire unit. That's going to require less prep work when you are ready to weld this on for your installation. Again, 2" by 2" trailer hitch opening. more


Watch Video

3/6/2015 1:30:35 PM



Curt Hitch Fabrication Parts - Receiver Tube - E-911 Review- Video

Curt Hitch Fabrication Parts - Receiver Tube - E-911 Review

Today we're going to be taking a look at part number E-911. This is the Curt six-inch Combo Bar with an inch and a quarter trailer hitch receiver. This is a hitch fabrication part so it's designed to be welded on to your particular application. It's going to have a nice forged collar design. Steel construction with a nice raw finish so it can easily be welded on to your application. It's going to require less prep work. more


Watch Video

2/23/2015 11:05:23 AM



Curt Hitch Fabrication Parts - Receiver Tube - C49360 Review- Video

Curt Hitch Fabrication Parts - Receiver Tube - C49360 Review

Today we're going to review part number C49360. This is the Curt Combo Bar with the 2-inch trailer hitch receiver opening in an unpainted finish. This receiver bar is sized and punched to fit all common weight distributing hitch ball mounts or utility ball mounts, has a welded on forged half-inch collar, provides durability. The tube is crafted with a raw finish so it's ideal for welding. When it's a raw finish it will save you on the prep time when you install this. Again, the receiver opening on this is 2 inches. Take a ruler, 2 inches by 2 inches. more


Watch Video

2/19/2015 11:12:27 AM



Curt Hitch Fabrication Parts - Receiver Tube - E-11 Review- Video

Curt Hitch Fabrication Parts - Receiver Tube - E-11 Review

Today we're going to review Part Number E-11. This is Curt 12" long combo bar with the 2" trailer hitch receiver opening in an unpainted finish. This part is designed for use in fabricating under cover receiver hitches, when there's no receiver available. It is made of a cold formed structural tubing. It is sized and punched to fit all common weight distributing hitch ball mounts, or utility ball mounts. Has a forged collar, as you can see right on the opening here. more


Watch Video

2/19/2015 10:10:23 AM



Curt Hitch Fabrication Parts - Shank - D32 Review- Video

Curt Hitch Fabrication Parts - Shank - D32 Review

Today we're going to review Part Number D-32. This is Curt solid steel 2" hitch bar with the raw finish. This part is designed to create your own hitch accessory using this strong, durable, solid steel hitch bar. It is constructed of a hot rolled steel for superior strength. You can see it is designed with rounded corners for greater versatility. It means it's designed to fit in the 2" x 2" trailer hitches. more


Watch Video

2/19/2015 9:09:12 AM



Curt Hitch Fabrication Parts - Shank - D30 Review- Video

Curt Hitch Fabrication Parts - Shank - D30 Review

Today we're going to review part number D30, this is the Curt solid steel 2" hitch bar with the raw finish. This will let you create your own hitch accessory using a strong durable solid steel hitch bar. It is constructed of a hot rolled steel for superior strength, you can see it is solid. This piece weighs about 13 pounds. It is designed, you can see, with the rounded corners for greater versatility. It is designed to fit into 2" by 2" trailer hitches. more


Watch Video

2/19/2015 9:09:10 AM



Curt Hitch Fabrication Parts - Shank - D34 Review- Video

Curt Hitch Fabrication Parts - Shank - D34 Review

Today we're going to review Part Number D-34. This is the Curt solid steel 2" hitch bar with the raw finish. This will allow you to create your own hitch accessory with a strong, durable, solid steel hitch bar. This is constructed of a hot rolled steel for superior strength. This piece right here weighs about 22 pounds. If you notice it is designed with rounded corners for greater versatility. more


Watch Video

2/18/2015 2:17:09 PM



Curt Hitch Fabrication Parts - Shank - D29 Review- Video

Curt Hitch Fabrication Parts - Shank - D29 Review

Today we're going to review part number D29. This is the Curt solid steel 2 inch hitch bar with the raw finish. This part will help you create your own hitch accessory with the strong, durable solid steel hitch bar. It is constructed of a hot rolled steel for superior strength. This piece right here weighs about 11 pounds. It is designed with rounded corners for greater versatility. It is designed to fit into 2 inch by 2 inch trailer hitches. more


Watch Video

2/18/2015 2:17:07 PM



Curt Hitch Fabrication Parts - Shank - C49537 Review- Video

Curt Hitch Fabrication Parts - Shank - C49537 Review

Today we're going to review part number C49537. This is a Curt solid-steel 2-inch hitch bar with a raw finish. This will let you create your own hitch accessory with this strong, durable solid-steel bar. It is constructed of a hot rolled steel for superior strength. It is designed with the rounded corners for greater versatility, and it is crafted with a raw finish which is ideal for welding. It saves a lot of time with the prep work. The application on this. more


Watch Video

2/18/2015 1:46:20 PM



Curt Hitch Fabrication Parts - Receiver Tube - E-912 Review- Video

Curt Hitch Fabrication Parts - Receiver Tube - E-912 Review

Speaker: Today, we're going to review Part Number E-912. This is the Curt 12-inch Combo bar with the 1 1/4 inch hitch receiver opening. This receiver bar is designed for use in fabricating an undercover receiver hitch when a receiver is not available. It is made of a cold-formed structural tubing. It is sized and punched to fit all common Class 1 or Class 2 ball mounts and accessories. The pinhole diameter is the 1/2-inch pinhole side. more


Watch Video

2/16/2015 12:02:38 PM



Draw-Tite Hitch Fabrication Parts - Receiver Tube - 2852 Review- Video

Draw-Tite Hitch Fabrication Parts - Receiver Tube - 2852 Review

Today we are going to review Part No. 2852. This is the draw tight 24" combo bar with the 2" x 2" hitch receiver opening. Now this 2" x 2" receiver bar is designed for use in fabricating under car receiver hitches when its receiver is not available. It is made of a cold form structural tubing. It is sized and punched to fit all common weight distribution hitch ball mounts or utility ball mounts. more


Watch Video

2/16/2015 10:29:06 AM



Curt Hitch Fabrication Parts - Receiver Tube - E-9 Review- Video

Curt Hitch Fabrication Parts - Receiver Tube - E-9 Review

Today we're going to review Part Number E-9. This is the Curt 6" combo bar with the 2" trailer hitch receiver. This does have a 2" x 2" trailer hitch receiver opening. You can see right there. This is a hitch fabrication part, it is designed to be welded on to your vehicle or trailer, and allow you to install a 2" ball mount into there. It does have an outer dimension; the outer dimension on it is 2 1/2", and the forged collar on the very opening area right here, the width on that would actually measure 3". more


Watch Video

2/13/2015 11:28:23 AM



Tow Ready Hitch Fabrication Parts - Receiver Tube - 80948 Review- Video

Tow Ready Hitch Fabrication Parts - Receiver Tube - 80948 Review

Today we're going to review part number 80948. This is the Tow Ready Combo Bar with the 2 inch Trailer Hitch Receiver. Now, this is a fabrication part which is perfect for constructing an under car receiver hitch when a receiver is not available. The receiver is designed with the appropriately sized tube for an easy insertion of ball mounts. You can see it even has the pin hole drilled on the side here. It is a raw finish which is what you want if you're going to be welding this to your trailer vehicle. more


Watch Video

11/18/2014 12:37:21 PM



  1