Stromberg Carlson Hitch Cargo Carrier Review - 2013 Toyota Highlander- Video
Today on our 2013 Toyota Highlander we're doing a test fit of the Stromberg-Carlson 23 by 60 cargo carrier. That part number is CC-100. Now this is designed to work with 2" hitches and has a weight capacity of 500 pounds. Now although it does have that high weight capacity, it is very lightweight so it's easy to put into and take out of your hitch. The first thing we're going to do while it's installed is take a few measurements. We'll start off with our ground clearance here. We're going to have about 10-1/2" of clearance. more
5/24/2016 9:22:57 AM
Curt Hitch Cargo Carrier Review - 2013 Toyota Highlander- Video
Today on our 2013 Toyota Highlander we're doing a test fit of the CURT folding 20 by 60 cargo carrier. That part number is C18151. Now this is designed to work with 2" hitches and has a weight capacity of 500 pounds. The first thing we're going to do is take a few measurements, starting off with our ground clearance. Going to have about 12-1/4" of clearance. Overall to our vehicle we're adding about 36-1/2". more
5/24/2016 9:22:50 AM
Curt Hitch Cargo Carrier Review - 2013 Toyota Highlander C18150- Video
Today on our 2013 Toyota Highlander we're doing a test fit of the CURT 20 by 60 cargo carrier. That part number is C18150. Now this is designed to work with 2" hitches and has a 500 pound weight capacity. The first thing we're going to do while it's on our vehicle is take a few measurements. We're going to start off with our ground clearance here. We're going to have about 14-3/4". more
5/24/2016 9:22:45 AM
MaxxTow Hitch Cargo Carrier Review - 2013 Toyota Highlander- Video
Today on our 2013 Toyota Highlander we're doing a test fit of the MaxxTow 48 by 21 cargo carrier. That part number is MT70422. Now this is designed to work with 2" hitches and has a 500 pound weight capacity. Although it does have that very high weight capacity, it is a lightweight aluminum cargo carrier so it's very easy to put into and take out of our hitch. The first thing we're going to do here is take a few measurements. Our ground clearance is going to be about 11-3/4". Overall to our vehicle we're adding about 30-3/4". more
5/24/2016 9:22:40 AM
Curt Hitch Cargo Carrier Review - 2013 Toyota Highlander C18110- Video
Today on our 2013 Toyota Highlander we're doing a test fit of the Curt 20 x 48 cargo carrier. That part number is C18110. This is designed to work with both 1-1/4 and 2-inch hitches and has a weight capacity of 300 pounds. Although it does have that pretty high weight capacity, it is a very lightweight cargo carrier, so it is easy to insert and take out of our hitch. We'll start off with a few measurements here. The first is going to be ground clearance. It'll have about 15 inches of ground clearance. more
5/24/2016 9:22:33 AM
Curt Folding Hitch Cargo Carrier Review - 2013 Toyota Highlander- Video
Today on our 2013 Toyota Highlander, well be test fitting the 24x60 Curt cargo carrier for 2 hitches, part number C18132. To begin our test fit, well slide the shank of the carrier into the receiver tube of the hitch. Well line up the pinhole and install our pin and clip.Now, well go over a few clearance measurements. We have a ground clearance of about 12. The closest point of the carrier to the rear of our Highlander is about 3. Weve added 14.5 to the overall length of our vehicle. more
10/23/2013 1:22:06 PM
Curt Folding Hitch Cargo Carrier Review - 2013 Toyota Highlander C18131- Video
Today on our 2013 Toyota Highlander, well be test fitting the 20x60 Curt cargo carrier for 2 hitches, part number C18131. To begin our test fit, well slide the shank of the carrier into the receiver tube of the hitch, line up the pinhole, and install our pin and clip. Now, well go over a few clearance measurements. We have about 12.5 of ground clearance. The closest point of the carrier to the rear of our Highlander is about 3 and weve added about 14 to the overall length of our vehicle. Well pull the pin and clip at the base of our carrier to allow it to unfold. With it in this position, we now have a ground clearance of about 17.5, the closest point of the carrier to the rear of our Highlander is about 8, and weve added about 36 to the length of our vehicle. more
10/23/2013 1:22:03 PM
Surco Hitch Cargo Carrier Review - 2013 Toyota Highlander- Video
Today on our 2013 Toyota Highlander, we'll be test fitting the Surco Cargo Carrier for 2 inch hitches part number 52018. To begin our test fit we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin holes and install our pin and clip. Now we'll go over a few clearance measurements. We have a ground clearance of about 12 inches. The closest point of the carrier to the rear of our Highlander is about 5 inches. We've added about 31 inches to the overall length of our vehicle. more
10/22/2013 3:05:09 PM
SportRack Cargo Carrier Review - 2013 Toyota Highlander- Video
Today on our 2013 Toyota Highlander, well be test fitting the 20x60 Sport Rack cargo carrier for 2 hitches, part number SR9850. To begin our test fit, well slide the shank of the carrier into the receiver tube of the hitch, line up the pinhole, and thread in our anti-rattle bolt, tightening it with a wrench. Now, well go over a few clearance measurements. We have about 12 of ground clearance. The closest point of the carrier to the rear of our Highlander is about 0.25 away. Weve added about 11 to the overall length of our vehicle. Well pull the pin and clip at the base of our carrier and allow it to unfold. more
10/22/2013 3:05:00 PM
Rola Dart Folding Hitch Cargo Carrier Review - 2013 Toyota Highlander- Video
Today, on our 2013 Toyota Highlander, we'll be test fitting a Rola Dart cargo carrier for two inch hitches,part number 59550. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole, and thread in our anti-rattle bolt, tightening it with a wrench. Now we'll go over some clearance measurements. We have about twelve and a half inches of ground clearance. The closest point of the carrier to the rear of our Highlander is about seven inches. We've added about fifteen and a half inches to the overall length of our vehicle, with the carrier in its folded position. We'll pull up on the orange handle on top, to allow our carrier to unfold. With it in this position, we now have aground clearanceof about seventeen inches. The closest point of the carrier to the rear of our vehicle is about seven inches, and we've added about forty and a half inches to the overall length of our Highlander. When opening our rear hatch door, we see that it breaks over our carrier at about seventeen inches. The exhaust system on this vehicle exits on the passenger side, and sits about twenty-one inches away from our carrier. This measurement is important to keep in mind when hauling materials that may be sensitive to heat. That completes today's test fit of the Rola Dart cargo carrier, part number 59550,on our 2013 ToyotaHighlander. . more
10/22/2013 3:04:42 PM
MaxxTow Aluminum Hitch Cargo Carrier Review - 2013 Toyota Highlander- Video
Today on our 2013 Toyota Highlander well be test fitting the aluminum MaxxTow cargo carrier for two inch hitches part #: MT70108. To begin our test fit well slide the shank of the carrier into to the receiver tube of the hitch, line up the pinhole and install our pin and clip. Now well go over a few clearance measurements. We have a ground clearance of about 11 and three quarter inches. The closest point of the carrier to the rear of our Highlander is about eight and a half inches. Weve added about 31 inches to the overall length of our vehicle. more
10/22/2013 9:28:11 AM
MaxxTow Hitch Cargo Carrier Review - 2013 Toyota Highlander- Video
Speaker: Today on our 2013 Toyota Highlander, well be test fitting the MaxxTow Cargo Carrier for 2" Hitches, part number MT70107. To begin our test fit, well slide the shank of the carrier into the receiver tube of the hitch, line up the pinhole and install our pin and clip.Now well go over a few clearance measurements. We have about 12 inches of ground clearance. The closest point of the carrier to the rear of our Highlander is about 6.5 inches, weve added about 26 inches to the overall length of our Toyota Highlander. When opening our rear hatch door, we see that it breaks over our cargo carrier at about 21 inches. The exhaust system on this vehicle exits on the passenger side and sits about 13.5 inches away from our cargo carrier. more
10/22/2013 9:27:05 AM
Curt Folding Aluminum Cargo Carrier Review - 2013 Toyota Highlander- Video
Speaker: Today on our 2013 Toyota Highlander, well be test fitting the 19x60 Curt Cargo Carrier for 2" Hitches, part number C18100. Well begin our test fit by sliding the shank of our aluminum cargo carrier into the receiver tube of our hitch, line up the pinhole and install our pin and clip.Now well go over a few clearance measurements. We have about 11 inches of ground clearance, the closest point of the carrier to the rear of our vehicle is about 2.5 inches. We have added about 9.5 inches to the overall length of our vehicle with the carrier in its folded position. We will pull the pin and clip at the base of our carrier and allow it to unfold. With the cargo carrier in this position, we now have a ground clearance of about 13 inches, the closest point of the carrier to the rear of our Highlander is about 10.5 inches, and weve added about 29.5 inches to the overall length of our Toyota.When opening our rear hatch door, we see that the door breaks over our cargo carrier at about 22.5 inches. more
10/21/2013 3:22:29 PM
Curt Hitch Cargo Carrier Review - 2013 Toyota Highlander- Video
Today, on our 2013 Toyota Highlander, we'll be test fitting the CURT cargo carrier for an inch and a quarter and two-inch hitches, part number C18145. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch. Line up our pinhole and thread in our anti-rattle bolt, tightening it with a wrench. Now, we'll go over a few clearance measurements. We have about 12 inches of ground clearance. The closest point of the carrier to the rear of our vehicle is about 5-1/2 inches. We've added about 25-1/2 inches to the overall length of our Highlander. more
10/21/2013 3:21:18 PM
