Surco Hitch Cargo Carrier Review - 2012 Nissan Xterra- Video
Today, on our 2012 Nissan Xterra, we'll be test fitting the Surco cargo carrier for two inch hitches, part number 52018. We'll begin our test fit by sliding the shank of the carrier into the receiver tube of the hitch, lining up the pin hole and installing our pin and clip. Now, we'll go over a few clearance measurements. We have about 17 inches of ground clearance. The closest point of the carrier to the rear of our Xterra is about five and a half inches. We've added about 31 inches to the overall length of our vehicle. The exhaust system on this vehicle exits on our passenger side and sits about 11 inches away from our loading platform. When opening our rear hatch, we see that the door breaks over the cargo carrier at about 16 inches. more
9/17/2013 1:29:52 PM
Rola Dart Folding Hitch Cargo Carrier Review - 2012 Nissan Xterra- Video
Today on our 2012 Nissan Xterra, well be test fitting the Rola Dart Cargo Carrier for 2 Hitches part number 59550. This carrier does fold so well be loading it in the folded position. Well slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and install our anti-rattle bolt, tightening it with a wrench. Now, well go over a few clearance measurement. We have about 16 1/2 of ground clearance. more
9/17/2013 1:29:10 PM
MaxxTow Aluminum Hitch Cargo Carrier Review - 2012 Nissan Xterra- Video
Today, on our 2012 Nissan Xterra, we'll be test fitting the Maxxtow Cargo Carrier for 2-Inch Hitches, part number MT70108. We'll begin our test fit by sliding the cargo carrier shank into the receiver tube of the hitch, lining up the pin hole, and installing our pin and clip. Now, we'll go over a few clearance measurements. We have about 16-1/2 inches of ground clearance. The closest point of the carrier to the rear of our Xterra is about 8-1/2 inches. We've added about 31 inches to the overall length of our Nissan Xterra. more
9/17/2013 9:17:32 AM
MaxxTow Hitch Cargo Carrier Review - 2012 Nissan Xterra- Video
Today, on our 2012 Nissan Xterra, we'll be test fitting the Maxxtow Cargo Carrier for 2-Inch Hitches, part number MT70107. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our pin and clip. Now, we'll go over a few clearance measurements. We have about 16-1/2 inches of ground clearance. The closest point of the carrier to the rear of our Xterra is about 7 inches. We've added about 26 inches to the overall length of our Nissan Xterra. The exhaust system on this vehicle exits on the passenger's side and sits about 12 inches away from our loading platform. more
9/17/2013 9:17:00 AM
Curt Folding Hitch Cargo Carrier Review - 2012 Nissan Xterra- Video
Today, on our 2012 Nissan Xterra, we'll be test fitting the Curt Folding Cargo Carrier for 2-Inch Hitches, part number C18132. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our pin and clip. With the carrier in this position, we'll go over a few clearance measurements. We have about 16-1/2 inches of ground clearance. The closest point of the carrier to the rear of our Xterra is about 2-1/2 inches. We've added about 14-1/2 inches to the overall length of our Nissan. We'll pull the pin and clip at the base of the carrier to allow it to unfold. more
9/16/2013 4:19:46 PM
Curt Folding Hitch Cargo Carrier Review - 2012 Nissan Xterra C18131- Video
Today on our 2012 Nissan Xterra, we'll be test fitting the Curt Folding Cargo Carrier for 2-Inch Hitches, part number C18131. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our pin and clip. Now, we'll go over a few measurements with the carrier in this position. We have a ground clearance of about 16 inches. The closest point of the carrier to the rear of our Xterra is about 3 inches, and we've added about 14 inches to the overall length of our Xterra. We'll pull the pin and clip at the base of the carrier and allow it to unfold. With the carrier in this position, we have a ground clearance of about 23 inches. more
9/16/2013 4:18:22 PM
Curt Folding Aluminum Cargo Carrier Review - 2012 Nissan Xterra- Video
Today, on our 2012 Nissan Xterra, we'll be test fitting the Curt Folding Cargo Carrier for 2-Inch Hitches, part number C18100. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our pin and clip. With the carrier in this position, we'll go ahead and go over some clearance measurements. We have about 14-1/2 inches of ground clearance. The closest point of the carrier to the rear of our Xterra is about 3-1/2 inches. We've added about 10 inches to the overall length of our Nissan. We'll pull the pin and clip at the base of the carrier and allow it to unfold. more
9/16/2013 4:16:45 PM
Curt Hitch Cargo Carrier Review - 2012 Nissan Xterra- Video
Today on our 2012 Nissan Xterra, well be test fitting the Curt Cargo Carrier for 1-1/4 and 2 inch hitches, part number C18145. To begin our test fit, well slide the shank of our carrier into the receiver tube of our hitch. Line up the pin hole and install our anti-rattle bolt tightening it with a wrench. Now well go over a few clearance of measurements. We have a ground clearance of about 17 inches. The closest point of the carrier to the rear of our Xterra is about 6 inches. more
9/16/2013 4:12:19 PM
