bing tracking image

2007 Nissan Murano Hitch Cargo Carrier Installation And Review Videos

     

Detail K2 20x60 Hitch Cargo Carrier Review - 2007 Nissan Murano- Video

Detail K2 20x60 Hitch Cargo Carrier Review - 2007 Nissan Murano

Today on our 2007 Nissan Murano, we are going to be doing a test for the Detail K2 Cargo Carrier. Its going to be 20 inches wide by 60 inches long. Its going to have that steady steel construction offering a 500 pound weight capacity as well as an expanded metal base for easy credibility. Its going to be for you two wind shanks only, its going to be part number K2 HCC 6-0-2. Lets go and start off by getting a few measurements. Our closest distance will be our first measurement, and we are going to have two points of close contact here on the back side back of the vehicle and its in this holded up still position. One is going to be back here, from the back of the hatch to the front of the rack. more


Watch Video

11/10/2015 8:26:07 AM



Curt 24x60 Hitch Cargo Carrier Review - 2007 Nissan Murano- Video

Curt 24x60 Hitch Cargo Carrier Review - 2007 Nissan Murano

Today on our 2007 Nissan Murano, we're going to be doing a test fit of the CURT cargo carrier. This is going to be part of our C18153. It's going to be twenty four inches wide by sixty inches long. And it's going to have a nice, sturdy steel construction with that expanded metal base and a five hundred pound weight capacity. You can see that it does have the folding option for your two inch shanks only. So, first thing we're going to do is go ahead and get our closest measurements. That's going to be from the back side of the bumper to the front side of the rack. more


Watch Video

11/10/2015 8:23:57 AM



Lets Go Aero Hitch Cargo Carrier Review - 2007 Nissan Murano- Video

Lets Go Aero  Hitch Cargo Carrier Review - 2007 Nissan Murano

Today on our 2007 Nissan Murano, we're going to be doing a test fit of the Let's Go Aero Gear Cage. This gear cage is going to be 32 inches wide by 48 inches long and it's going to be for your 2 inch receiver tubes only. Part number is going to be HCR222. Let's go ahead and start off by getting a few measurements. Our closest distance will be from the rear of the bumper to the from side of the cargo carrier here at about four and three-quarter inches. Overall this is so we've added to the back of the vehicle from the rear of the bumper to the back side of the cargo carrier, it's going to be about 39 inches. Our ground clearance, from the bottom side of the shank, it's going to be about eleven and three-quarter inches to this point here. Now let's go ahead and check our exhaust clearance here, from the back end of the exhaust tips to the front side of the cargo carrier. more


Watch Video

11/10/2015 8:22:09 AM



  1