bing tracking image

2013 Kia Sorento Hitch Cargo Carrier Installation And Review Videos

     

Rola Dart Folding Hitch Cargo Carrier Review - 2013 Kia Sorento- Video

Rola Dart Folding Hitch Cargo Carrier Review - 2013 Kia Sorento

Today on our 2013 Kia Sorento, we'll be test fitting the 23" x 56" Rola Dart cargo carrier for 2" hitches, part number 59550. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and thread in our anti-rattle bolt, tightening it with a wrench. Now we'll go over a few clearance measurements. With the carrier in this position, we have about 11" of ground clearance. The closest point of the carrier to the rear of our Sorento is about 2-1/2". And we've added about 11" to the overall length of our vehicle. more


Watch Video

7/8/2013 11:54:54 AM



Surco Hitch Cargo Carrier Review - 2013 Kia Sorento- Video

Surco Hitch Cargo Carrier Review - 2013 Kia Sorento

more


Watch Video

12/26/2012 3:12:27 PM



Curt Folding Aluminum Cargo Carrier Review - 2013 Kia Sorento- Video

Curt Folding Aluminum Cargo Carrier Review - 2013 Kia Sorento

Toda on our 2013 Kia Sorrento well be test fitting the Curt 20 by 60 folding cargo carrier, part number C18100. To begin our test fit well slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install our hitch pin. With the pin in well put the clip on the other side which will secure our cargo carrier to the vehicle. Now well go ahead and give you a few measurements. Our ground clearance of the carrier with the platform folded up is nine inches and from the closest point of the carrier to the back of the vehicle is two and a half inches. Well now pull the pin here at the base where we can then fold down the cargo carrier platform. more


Watch Video

11/8/2012 12:54:15 AM



Curt Hitch Cargo Carrier Review - 2013 Kia Sorento- Video

Curt Hitch Cargo Carrier Review - 2013 Kia Sorento

Today on our 2013 Kia Sorento well be test fitting the Curt 20 x 48 cargo carrier for both inch and a quarter and two inch hitches, part number C18145. To begin our test fit, using the included adapter for the two inch hitch well slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install and tighten down our anti-rattle bolt. Now that the bolt is tight, our cargo carriers secured to the vehicle and were ready to load it up. Well now go ahead and give you a few measurements. From the closest point of the cargo carrier to the back of the vehicle is two inches, and the cargo carrier will add an additional 21 inches of overall length to the vehicle. Our ground clearance at the back of the carrier is 10 inches, and the exhaust on this vehicle does exit the passengers side here at the rear bumper. more


Watch Video

11/6/2012 7:13:56 AM



  1