Curt 24x60 Hitch Cargo Carrier Review - 2009 Kia Sedona- Video
Today on our 2009 Kia Sedona we're going to be test fitting the Curt 24 x 60 Folding Cargo Carrier for 2 inch hitches, part number C18145. We'll begin our test fit by inserting the shank of the carrier into the hitch on our vehicle. You'll want to watch for the hitch pin holes to line up. Once those are in line we'll take our pin and clip. We're using part number PC3 today as this carrier doesn't come with one. You'll slide it through the holes and attach the clip to the other side. The closest part of the carrier to the vehicle is going to be the rail to the bumper. That's going to measure about 6 inches from the outer most point of the bumper to the carrier. more
10/16/2014 2:18:24 PM
Surco Products 24x60 Hitch Cargo Carrier Review - 2009 Kia Sedona- Video
Today on our 2009 Kia Sedona, were going to be test fitting the Surco 24x60 Cargo Carrier for two-inch hitches part number 52018. Well begin our test fit by inserting the shank into the hitch on our vehicle. Youll want to watch for the hitch pinholes to line up. With those in line, well take our pin and clip. Were using part number PC3 today and slide it through the hitch pinholes. You may have to wiggle your carrier around a little bit to get everything to slide through. Youll then want to attach the clip to the other side and well get a couple of measurements. more
7/23/2014 5:19:16 PM
Pro Series Hitch Cargo Carrier Review - 2009 Kia Sedona- Video
Today on our 2009 Kia Sedona, we're going to be test fitting the Pro Series Solo, 31x47 cargo carrier for 2 inch hitches, part number PS1040100. We'll begin our test fit by inserting the shank of the carrier into the hitch on our vehicle. The measurements and the weight of this carrier make it a little awkward to handle. I've found it's easiest to get it resting in the hitch, you'll then move around to the back and you're going to pick up and push in at the same time. Once you have it started, you want to watch for the hitch pin holes to line up. With those in line, we'll take our pin and clip. We're going to be using part number PC3 today. We'll slide it through the holes. more
7/23/2014 4:44:57 PM
MaxxTow Hitch Cargo Carrier Review - 2009 Kia Sedona- Video
Today on our 2009 Kia Sedona, we are going to be test fitting the Maxxtow 20x47 Cargo Carrier for 2 inch hitches part number MT70108. We'll start our test fit by inserting the shank of the carrier into the hitch in our vehicle. This is an aluminum carrier, it's nice and light which makes it easy to work with. We want to watch for our hitch pin holes to line up. Once those are inline, we'll take our pin and clip, today we are using part number PC3. We'll slide it through the holes and attach the clip to the other side. more
7/23/2014 4:41:57 PM
Curt 17x46 Hitch Cargo Carrier Review - 2009 Kia Sedona- Video
Today on our 2009 Kia Sedona, we're going to be test fitting the Curt 17x46 cargo carrier for 1 1/4" and 2" hitches, part number C18145. We'll begin our test fit by inserting the shank into the hitch on our vehicle. You'll want to watch for the hitch pin holes to line up. With those in line, we'll take the threaded anti-rattle hitch bolt and thread that into place. We'll get this hand tight and then we can tighten it down with a wrench. Try to find a good way to get in there so you have the room to do it. Tightening this down is going to help to take any extra play out of the shank of the carrier, which helps to eliminate movement overall as you're going down the road. more
7/23/2014 4:36:10 PM
