Pro Series Solo Hitch Cargo Carrier Review - 2014 Ford Expedition- Video
Today on our 2014 Ford Expedition, we're going to be test fitting the 31" by 47" Pro Series Solo Cargo Carrier for 2" hitches. With a 400-pound weight capacity, its part number is PS1040100. To begin our test fit, we'll slide the shank of the cargo carrier into the receiver tube of our hitch. We'll line up our pin holes, slide our pin through and secure it with a clip. Let's go over a few clearance measurements. As you can see here at the rear, you'll have about 20" worth of ground clearance. The closest point of the rack to the back of our Expedition is about 9 1/2". more
3/12/2014 2:53:24 PM
MaxxTow Aluminum Hitch Cargo Carrier Review - 2014 Ford Expedition- Video
Today on our 2014 Ford Expedition were going to be test fitting the 20 x 47 Maxx Tow Cargo Carrier for 2 inch hitches. With the 500 pound weight capacity its part number is MT70108. To begin our test fit were going to slide the shank of the carrier into the receiver tube of our hitch, well then lineup our pin holes, slide through our pin, and secure it with a click. Lets go over a few measurements here. You will have about 17 inches worth of ground clearance. The closest point of the rack to the back of the vehicle is about 6 inches and overall weve added about 29 inches to the length of the Expedition. When opening our rear hatch it breaks over the carrier at about 14 inches. With our cargo carrier secure were ready to load up our gear and hit the trail. That will complete todays test fit of the 20 x 47 Maxx Tow Cargo Carrier, part number MT70108, on our 2014 Ford Expedition. . more
3/12/2014 2:51:37 PM
MaxxTow Hitch Cargo Carrier Review - 2014 Ford Expedition- Video
Today on our 2014 Ford Expedition well be test fitting the 17 x 50 Maxx Tow Cargo Carrier for 2 inch hitches. With a 500 pound weight capacity its part number is MT70107. To begin our test fit well slide the shank of the carrier into the receiver tube of our hitch, well lineup our pin holes, slide through our pin, then secure it with a click. Now lets take a few measurements. As you can see here at the rear of the rack youll have about 17 inches worth of ground clearance. The closest point of the rack to the back of the Expedition is about 4 inches and weve added about 24 inches to the overall length of the vehicle. When opening our rear hatch it breaks over the carrier at about 13 inches. With our rack secure were ready to load our gear and hit the road. That will complete todays test fit of the 17 x 50 Maxx Tow Cargo Carrier, part number MT70107, on our 2014 Ford Expedition. . more
3/11/2014 12:53:20 PM
Curt Hitch Cargo Carrier Review - 2014 Ford Expedition- Video
Today on our 2014 Ford Expedition, we'll be test fitting the 17x46 Curt Cargo Carrier for 1 1/4 and 2 inch hitches with a 500 pound weight capacity. It's part number is C18145. To begin our test fit we'll slide the shank of the carrier into the receiver tube of our hitch, line up our pin holes, thread in our anti rattle bolt and tighten it down with a wrench. As you can see we have about 18 inches of ground clearance here at the rear of the rack. The closest point of the rack to the back of the Expedition is about 3 3/4 of an inch and overall we've added about 23 1/2 inches to the length of the Expedition. When opening our rear hatch, it breaks over our carrier at about the 13 inch mark. more
3/11/2014 12:52:35 PM
Curt Folding Hitch Cargo Carrier Review - 2014 Ford Expedition- Video
Today, on our 2014 Ford Expedition, we're going to be test fitting the 24 by 60 Curt Cargo Carrier for 2-inch hitches. With a 500-pound weight capacity, its part number is C18132. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of our hitch, line up our pin holes, slide through our pin, and secure it with a clip. In this position, you'll have about 17-3/4 of an inch worth of ground clearance. The closest point of the rack to the back of our vehicle is about an inch and three-quarters, and overall, we've added about 12-1/2 inches to the length of our Expedition. Pulling the silver pin at the base of the rack will allow it to tilt away from our vehicle. We'll want to reinsert the pin in the new location to secure it. more
3/11/2014 12:51:32 PM
Curt Folding Hitch Cargo Carrier Review - 2014 Ford Expedition C18131- Video
Speaker: Today on our 2014 Ford Expedition we're going to be test fitting the 20 x 60 Curt Cargo Carrier for 2" Hitches with a 500 lbs. weight capacity, its Part No. Is C18131. To begin our test fit we'll slide the shank of the carrier into the receiver tube of our hitch, line up our pinholes, slide through our pin and secure it with our clip. With our rack in this position you'll have about 18" worth if ground clearance. The closest point of the rack to the back of our vehicle is about an 1 3/4" and overall you've added about 12 1/2" to the length of the Expedition. Pulling the silver pin at the base of the carrier will allow us to tilt it away from our vehicle into the loading position. We'll want to reinsert the pin to secure it. more
3/11/2014 12:50:27 PM
Curt Folding Aluminum Cargo Carrier Review - 2014 Ford Expedition- Video
Today, on our 2014 Ford Expedition, we're going to be test fitting the 19 by 60 Curt cargo carrier for two inch hitches with a 500 pounds weight capacity. It's part number is C18100. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of our hitch, line up our pin holes, slide through our pin, and secure it with a clip. In this position, you can see we have about 16 1/2 inches worth of ground clearance. The closest point of the rack to the back of our vehicle's about 2 1/4 inches and overall, we've added about 8 inches to the length of the vehicle. Pulling the silver pin at the base of the rack will allow us to tilt it away from our vehicle into the loading position. We'll want to reinsert the pin to secure it. At the rear of the rack, here. more
3/11/2014 12:49:25 PM
Rola Dart Folding Hitch Cargo Carrier Review - 2014 Ford Expedition- Video
Today on our 2014 Ford Expedition, were going to be test fitting the Rola 23x56 Dart Cargo Carrier for 2 inch hitches, with a 450 pound weight capacity, its part number is 59550. Begin our test fit by sliding the shank of the carrier into the receiver tube of our hitch. Well line up the pin holes and thread in the anti-rattle bolt. Well then tighten it down with a wrench. In this position, youll have about 18 inches of ground clearance here. The closest point of the rack to the back of the vehicle is about 4-1/4 inches. more
2/26/2014 3:01:35 PM
Surco Hitch Cargo Carrier Review - 2014 Ford Expedition- Video
Today on our 2014 Ford Expedition, we'll be test fitting the 24-by-60, Surco Cargo Carrier for two-inch hitches. With a 500-pound weight capacity, it's part number is 52018. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of our hitch. We'll then line up our pin holes, slide through our pin, and secure it with the clip. As you can see, we'll have about 17-1/4 inches worth of ground clearance here at the rear of the rack. The closest point of the rack to the back of our Expedition is about 3-1/2 inches away, and overall, we've added about 29-1/4 inches to the length of the vehicle. more
2/25/2014 3:26:08 PM
