SportRack Super EZ Hitch Bike Rack Review - 2014 Nissan Rogue- Video
Today on our 2014 Nissan Rogue, we'll be test fitting the Sport Rack Super EZ Platform Style Hitch Mounted 2 Bike Rack, part number SR2901LR. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pin holes, we'll thread in our anti-rattle bolt, tighten it down using a wrench, and then secure it with the lock on the other side. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. From the back of the bike rack, we have about 14-1/4" of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 4" away, and we've added about 20" to the overall length of our Rogue. To access the cargo area, we'll need to remove the three black pins at the base of the bike rack. We'll fold down the two wheel trays and the mast. As you can see, we can easily gain access to the rear hatch. To load up a bike, we'll need to make sure the mast of the rack is in its upright position. more
7/30/2014 2:53:32 PM
Saris Freedom Hitch Bike Rack Review - 2014 Nissan Rogue- Video
Today, on our 2014 Nissan Rouge, we'll be test-fitting the Saris Freedom hitch-mounted platform style 4-Bike Rack, part number SA4414B. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pin holes, we'll take the anti-rattle bolt and insert the end to the pin holes on the driver's side. We'll thread it in and tighten it down with the wrench and then secure it with a clip on the other side. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 18 3/4 inches of ground clearance at the back of the bike rack. Closest part of the bike rack to the closest part of the vehicle is about 5 inches away and we've added about 18 inches to the overall length of our Rouge. more
7/30/2014 2:51:20 PM
Thule Helium Aero Hitch Bike Rack Review - 2014 Nissan Rogue- Video
Today on our 2014 Nissan Rogue, well be test fitting the Thule Helium Aero Hitch Mounted Hanging Two Bike Rack, part number TH9042. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After allowing the integrated hitch pin to fall into place, well turn the black knob which will engage the anti-rattle device. With the bike rack secured to the vehicle, well go over a few measurements to see how the two fit together. We have about 16 inches of ground clearance. Closest part of the bike rack to the closets part of the vehicle is about 2-1/2 inches away. more
5/27/2014 2:07:00 PM
Swagman Titan Hitch Bike Rack Review - 2014 Nissan Rogue- Video
Today on our 2014 Nissan Rogue we'll be test fitting the Swagman Titan Hitch Mounted 4-Bike Rack, part number S63410. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pin holes we'll thread in our anti-rattle bolt and tighten it down using a wrench. With the bike rack secured we'll go over a few clearance measurements to see how the two fit together. We have about 15" of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 3" away. We have added about 15" to the overall length of our Nissan. more
5/27/2014 12:51:38 PM
SportRack 3 Bike Rack Review - 2014 Nissan Rogue- Video
Today on our 2014 Nissan Rouge, we'll be test fitting the Sport Rack Hitch Mounted 3 Bike Rack, part# SR2403. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pin holes, we'll thread in our anti-rattle bolt, tighten it down with a wrench. Go With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 14 1/2" of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 2 1/2" away, and we've added about 7" to the overall length of our Nissan. We can now remove the black pin on the top of the mast and swing the cradle arms out. With the cradle arms out, we've added about 24" to the overall length of our Rouge. To access the cargo area, we'll need to remove the black pin and clip at the base of the bike rack and tilt down the mast. more
5/27/2014 12:51:05 PM
Saris Axis 3 Bike Rack Review - 2014 Nissan Rogue- Video
Today on our 2014 Nissan Rogue well be test fitting the Saris Axis hitch mounted aluminum three bike rack, part number SA843B. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pin holes well thread in our anti-rattle bolt, tighten it down using a wrench and then secure it with a lock on the other side. With the bike rack secured well go over a few clearance measurements to see how the two fit together. We have about 11 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about a quarter of an inch. more
5/27/2014 12:49:38 PM
Prorack 4 Hitch Bike Rack Review - 2014 Nissan Rogue- Video
Today on our 2014 Nissan Rogue, well be test fitting the ProRack Hitch Mounted Hanging Four Bike Rack, part number PR8062404. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pin holes, well thread in our anti-rattle bolt, tightening it down with a wrench. With the bike rack secured, well go over a few clearance of measurements to see how the two fit together. We have about 12 inches of ground clearance. The closest part of the bike rack to the closets part of the vehicle is about 1-1/2 inches away. more
5/27/2014 12:45:22 PM
Pro Series Q-Slot 2 and 4 Bike Hitch Bike Rack Review - 2014 Nissan Rogue- Video
Today on our 2014 Nissan Rogue, well be test fitting the Pro Series Q-Slot Platform Style 2 and 4 Bike Rack for 2 inch hitches, part number PS63138. For todays test fit, well be installing the 2 bike configuration for the 2 inch hitch. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pin holes, well thread in our anti-rattle bolt and tighten it down using a wrench. With the bike rack secured, well go over a few clearance of measurements to see how the two fit together. We have about 12-3/4s of an inch of ground clearance. more
5/27/2014 12:44:03 PM
Hollywood Racks Traveler 5 Hitch Bike Rack Review - 2014 Nissan Rogue- Video
Today on our 2014 Nissan Rogue we'll be test fitting the Hollywood Tracks Traveler Hitch Mounted Hanging 5-Bike Rack for 2" hitches, part number HR9200. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up our pin holes we'll thread in the anti-rattle bolt and tighten it down using a wrench. With the bike rack secured we'll go over a few clearance measurements to see how the two fit together. We have about 12" of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 6" away and we have added about 12-1/2" to the overall length of our Nissan. We'll now loosen up the black knobs on the upper left and right hand corner of the mast. more
5/27/2014 12:38:21 PM
Hollywood Racks Traveler Hitch Bike Rack Review - 2014 Nissan Rogue- Video
Today on our 2014 Nissan Rogue we'll be test fitting the Hollywood Racks Traveler Hitch Mounted 4-Bike Rack, part number HR8500. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pin holes we'll thread in our anti-rattle bolt and tighten it down using a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 12" of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 1/4" away. There is a little bit of wiggle room in the mast but it will not come back and hit the rear of your hatch. more
5/27/2014 12:36:03 PM
Hollywood Racks Traveler Tow n Go Bike Rack Review - 2014 Nissan Rogue- Video
Today on our 2014 Nissan Rogue we'll be test fitting the Hollywood Racks Traveler Tow 'n Go 3-Bike Rack, part number HR135. Today we'll be using the ball mount with an extra long shank, part number 80232. Keep in mind the ball mount and hitch ball are sold separately. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch. We'll then go ahead and line up the pin holes and secure it with a standard 5/8 hitch pin and clip. You'll notice since the ball mount is secured with only a hitch pin, there is some wobble within the hitch which may cause the back of the bike rack to hit the rear of the vehicle. more
5/27/2014 2:39:04 AM
