RockyMounts Hitch Bike Racks Review - 2013 Nissan Rogue- Video

Speaker 1: Today on our 2013 Nissan Rogue we're doing a test fit of the Rocky Mounts Monorail Platform Style 3 Bike Rack. That part number is RKY10004-10005. Now we already have our bike secured down. We're first going to go over one of the main features of our rack, which is going to be our tilting feature. We're going to have a lever here at the bottom. That blue lever is going to allow us to tilt it as well as fold it. more

Watch Video

8/21/2017 10:47:30 AM

Hollywood Racks Traveler 5 Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting the Hollywood Racks Traveler Hitch Mounted 5-bike Rack, part number HR9200. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in the anti-rattle bolts, and then tighten it down using a wrench. With the bike racks secured, we'll go over a few clearance measurements to see how the two fit together. We have about 11 1/2 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about 7 1/2 inches away. more

Watch Video

11/5/2013 10:00:22 AM

Softride Dura Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue well be test fitting the Softride Dura Parallelogram tilting four bike rack, part number SR26247. Well begin our test fit by sliding the shank of the bike rack into the opening of hitch. Well thread in the anti-rattle bolt and tighten it down using a wrench. With the bike rack secured well go over a few clearance measurements to see how the two fit together. We have about 11 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about one inch away, and weve added about 32 inches to the overall length of our Nissan Rogue. more

Watch Video

11/5/2013 10:00:22 AM

SportRack Hitch Platform 4 Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting this SportRack Platform Style 4-bike Rack, part number SR2902. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in the anti-rattle bolt, and then tighten it down using a wrench. With the bike rack secure, we'll go over a few clearance measurements to see how the two fit together. From the back of the bike rack, we have about 19 inches of ground clearance. From the lowest part of the bike rack, we have about 14 1/2 inches of ground clearance. more

Watch Video

11/5/2013 10:00:22 AM

Swagman Titan Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting the Swagman Titan. Hitch-mounted four-bike rack, part number S63410. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in the anti ridal 00:13 bolt, and tighten it down using a wrench. With the bike rack secure, we'll go ahead and bring out our cradle arms. We can do this by lifting up on the black lever of the mast, and swing in the mouth. To access the cargo area, we can lift up at the black lever at the base of the bike rack, and tilt the mast down. As you can see, we can easily gain access to the rear hatch. more

Watch Video

11/5/2013 10:00:22 AM

Thule Helium Aero Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting the Thule Helium Aero Hitch-Mounted 2 Bike Rack part number TH9042. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch, allowingthe integrated hitch pin to fall into place, and we'll then turn the black knob to engage the anti-rattle device. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 18 inches of ground clearance at the rear of the bike rack, and we've added about 15 inches to the overall length of our Nissan. We can now lift up on the gray lever at the top of the mast and swing the cradle arms out. With the cradle arms out, we've added about 23 and a half inches to the overall length of our Nissan. To access the cargo area, we can lift up the gray lever at the base of the bike rack and tilt the mast down. more

Watch Video

11/5/2013 10:00:22 AM

Thule Vertex 4 Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rouge, we'll be test fitting the Thule Vertex hitch mounted four-bike rack, part number TH9029. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll line up our pin holes,tread our anti-rattle bolt and tighten it down witha wrench. With the bike rack secured, we'll go over and do clearance measurements to see how the two fit together. We have about 14inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about two inches and we've added about eightinches to the overall length of our Nissan with the cradle arms down. more

Watch Video

11/5/2013 10:00:22 AM

Thule Hitching Post Pro Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting a Thule Hitching Post Pro, part number TH934XTR. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti-rattle bolt and then tighten it down using a wrench. With the bike rack secured, we'll go over a couple clearance measurements to see how the two fit together. We have about 13-3/4 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about 5-1/2 inches away, and we've added about 12 inches to the overall length of our Nissan. We can now pull the gold pin at the top of the mast to swing the cradle arms out. more

Watch Video

10/29/2013 4:31:20 PM

Pro Series Q-Slot 2 and 4 Bike Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue well be test fitting the Pro Series Q Slot platform style two and four bike rack, part number PS63138. For todays test fit well be test fitting the two configuration for two inch hitches. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well thread in our anti-rattle bolt and then tighten it down using a wrench. With the bike rack secured well go over a few clearance measurements to see how the two fit together. We have about 12 inches of ground clearance. more

Watch Video

10/29/2013 4:15:00 PM

Hollywood Racks Traveler Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting the Hollywood Racks Traveler hitch mounted four bike rack, part number HR8500. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch, while threading the anti-rattle bolts and tighten it down using a wrench. With the bike rack secured, we'll go ahead and swing out our dual arms. We'll remove the pin at the top of the mast and swing out the cradle arms, re-securing it with the pin. To access the cargo area, we can pull the pin at the base of the carrier and tilt the mast down. As you can see, we can easily gain access to the rear hatch. To load up a bike, we'll make sure the mast is in its upright position. We'll undo the cradle straps, place our bike into the frame cradles, and then secure it with the straps. With our bike all loaded up, that'll complete today's test fit of the Hollywood Racks Traveler, part number HR8500, on our 2013 Nissan Rogue. . more

Watch Video

10/29/2013 4:07:08 PM

Thule Doubletrack Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rouge, we'll be test fitting the Thule Doubletrack Platform-Style Hitch 2 Bike Rack. Part number TH990XT. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti-rattle bolt and tighten it down using a wrench. With the bike rack secured, we'll go over some clearance measurements to see how the two fit together. We have about 11 and one quarter inches of ground clearance from the lowest part of the bike rack. more

Watch Video

10/29/2013 12:11:32 PM

Thule Apex 4 Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue well be test fitting the Thule Apex hitch mounted four bike rack part #: TH9025. Well begin our test fit by sliding the shank of our bike rack into the opening of the hitch. Well allow the integrated hitch pin to fall into place and well then turn the black knob at the base of the bike rack to engage the anti-rattle device. With the bike rack secured well go over a couple of clearance measurements to see how the two fit together. We have about 15 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is at the anti-rattle knob about a quarter of an inch away and weve added about eight inches to the overall length of our Nissan. more

Watch Video

10/29/2013 12:08:56 PM

Thule Apex 4 Swing Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting a Thule Apex Swing, hitch-mounted four-bike rack, part number TH9027. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll allow the integrated hitch pin to fall into place, and then we'll turn the black knob to engage the anti-rattle device. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 13-1/2 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 1/4 of an inch away and with the cradle arms down, we've added about 8 inches to the overall length of our Nissan. more

Watch Video

10/29/2013 12:08:56 PM

Swagman Jackknife Bike Rack Review - 2013 Nissan Rogue- Video

Today, on our 2013 Nissan Rogue, we'll be test fitting the Swagman Jackknife, hitch-mounted two-bike rack, part number S63450. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in the anti-rattle bolt and tighten it down using a wrench. With the bike rack secured, we'll go over a few clearance measurements. We have about 12 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 8 inches away, and we've added about 14 inches to the overall length of our vehicle. more

Watch Video

10/29/2013 11:52:37 AM

SportRack Super EZ Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue well be test fitting the Sportrack Super EZ platform style two bike rack, part number SR2901LR. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well line up the pin holes, thread our anti-rattle bolt through the pin holes and tighten it with a wrench. With the bike rack secured well go over a few clearance measurements to see how the two fit together. We have about 14 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about five and a half inches away, and weve added about 21 inches to the overall length of our Nissan Rogue. more

Watch Video

10/29/2013 9:35:18 AM

Rhino-Rack 4 Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rouge, we'll be test fitting the Rhino Rack hitch mounted four-bike rack, part number RBC038. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll tread our anti-rattle bolt and tighten it down using a wrench. With the bike rack secured, we'll go over and do clearance measurements to see how the two fit together. We have about 15 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about two inches and with the cradle arms down, we've added about 9.5 inches to the overall length of our Nissan. more

Watch Video

10/28/2013 4:41:17 PM

Prorack 4 Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting the pro-rack hitch mounted four bike rack, part number PR8062404. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread on our anti-rattle bolt and tighten it down using a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 11" of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about 3", and we've added about 26 1/2" to the overall length of our Nissan Rogue. To access the cargo area, we can pull the silver pen at the base of the bike rack and tilt the mast down. As you can see, we can easily gain access to the rear hatch. To load up a bike, we'll make sure the mast is in its upright position. We'll undo the cradle straps, place our bike into the frame cradles, and then secure it with the straps. With our bike all loaded up, that will complete today's test fit for the pro-rack hitch mounted bike rack, part number PR806204 on our 2013 Nissan Rogue. . more

Watch Video

10/28/2013 4:35:54 PM

Hollywood Racks Traveler Tow n Go Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting the Hollywood Racks Traveler Tow and Go Hitch Mounted three bike carrier, part number HR135. For today's test fit we'll be using the hidden hitch ball mount with an extra long shank, part number 80232. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch, we'll then secure it with the pin and clip. Keep in mind, the ball mount, the pin and clip and the hitch ball are all sold separately. To load up a bike, we'll pull out the black pin in the top of the mast and swing the cradle arms out. With the cradle arms out, we'll go ahead and undo the cradle straps and place our bike into the frame cradles. Now with our bike all loaded up. more

Watch Video

10/28/2013 4:23:25 PM

  1