bing tracking image

2013 Nissan Murano Hitch Bike Racks Installation And Review Videos

     

Swagman Hitch Bike Racks Review - 2013 Nissan Murano- Video

Swagman  Hitch Bike Racks Review - 2013 Nissan Murano

Today in our 2013 Nissan Murano, we're going to be test fitting the Swagman XC 2 bike rack, part number S64650. We already have a bike installed on the rack. Let's go ahead and take a closer look and show off some of the features. How the bike attaches to the rack, we're going to have one point of contact and that's going to be a frame hook up here. It is padded, so your bike will not get scratched up once it's installed. We also have these adjustable wheel cradles here you turn to the left to loosen them up, and then move along the arms freely to accommodate different size bikes and to assist with loading. We also have this nice raised shank here, so when you do have hitches that sit a little bit lower to the ground you're not going to have clearance issues between the bike rack itself and the ground. more


Watch Video

10/5/2016 12:46:18 PM



Yakima HoldUp Hitch Bike Racks Review - 2013 Nissan Murano- Video

Yakima HoldUp Hitch Bike Racks Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano we're going to be test fitting the Yakima HoldUp 2 Bike Rack, part number Y02443. We already have a bike installed on the rack, let's go ahead and take a closer look and show off some of the features. Now the most prominent feature of this bike rack is the fact that you can tilt it away from the vehicle with the bike still attached. To do that holding on to the bike rack you come to this red knob at the front, pull out, then come down. With that we have access to our rear hatch to get whatever we need with plenty of space on either side to do so. To put it back in it's original position simply lift up, you hear that click and it's locked back into place. Now some other features of this bike rack it does have an integrated cable lock here at the top of the wheel hook, just pull it up and around the bike and attach it to this point on the other side, lock it into place and your bike is secure on the rack. more


Watch Video

10/5/2016 12:46:09 PM



Kuat Hitch Bike Racks Review - 2013 Nissan Murano- Video

Kuat  Hitch Bike Racks Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano, we're going to be test fitting the Kuat NV 2.0 2-Bike Platform Rack for 2-inch hitches, part number NV22G. We already have a bike installed on the rack. Let's go ahead and take a closer look and show off some of the features. Now, the most prominent feature about this bike rack is the fact that it can tilt away from the vehicle with the bike still attached. To do that, you have this release lever at the front, and while holding onto the bike rack, you just pull it towards you and let the bike rack come down. With that, we have full access to our rear hatch to get whatever we need with plenty of space on either side to do so. Now, to put it back in its original position, we'll just lift up. more


Watch Video

10/5/2016 12:37:39 PM



Thule Doubletrack Hitch Bike Rack Review - 2013 Nissan Murano- Video

Thule Doubletrack Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano we'll be test fitting the Thule Doubletrack Platform-Style Two Bike Carrier, part number th990xt. Now to begin our test fit we'll simply slide the shank of the carrier into the opening of the hitch. Line up our pin holes, thread our anti-rattle bolt through the pin holes and tighten with a wrench.Now that our Thule Doubletrack is secured to our Nissan Murano we'll go over a few clearance measurements to see how they fit together. We have about 11 inches of ground clearance. Closest part of the carrier to the closest part of the vehicle here at the rear bumper is about 5-1/2 inches.With the platform folded up we've added about 12 inches to the overall length of the vehicle. We'll now pull the gray lever at the base of the carrier to tilt the platform down. more


Watch Video

6/21/2013 3:44:34 PM



Thule Apex 4 Hitch Bike Rack Review - 2013 Nissan Murano- Video

Thule Apex 4 Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano we'll be test fitting the Thule Apex Four Bike Carrier, part number th9025. To begin our test fit we'll slide the shank of the carrier into the receiver tube of our hitch. We'll let the built-in pin go ahead and snap into position and then we'll move to the hand knob and engage our anti-rattle device.Now we'll go ahead and go over a few clearance measurements. We have about 14 inches of ground clearance. The closest point of the carrier to the rear of the vehicle is about 2-1/2 inches. With the bike rack in its folded position we've added about 12 inches to the overall length of our vehicle. more


Watch Video

6/21/2013 3:43:15 PM



Swagman Titan Hitch Bike Rack Review - 2013 Nissan Murano- Video

Swagman Titan Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano we'll be test fitting the Swagman Titan Four Bike Carrier, part number s63410. To begin our test fit we'll slide the shank of the carrier into the receiver tube of our hitch. We'll line up the pin hole and thread in our anti-rattle bolt and go ahead and tighten it with a wrench.Now we'll go ahead and go over a few clearance measurements. We have a ground clearance of about 14 inches. With the bike rack in the folded position we've added about 19 inches to the overall length of our vehicle. Now we'll go ahead and pull the lever at the base of the carrier and allow our bike carrier to tilt.This gives us easy access to our rear hatch in our cargo area. more


Watch Video

6/21/2013 3:39:36 PM



Yakima DoubleDown Ace Hitch Bike Rack Review - 2013 Nissan Murano- Video

Yakima DoubleDown Ace Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano we'll be test fitting the Yakima Doubledown Ace Four Bike Carrier, part number y02451. To begin our test fit we'll slide the shank of the carrier into the receiver tube of our hitch. Then we'll go ahead and place the included pin into position. Now we'll move to the rear of the shank where we'll use the hank knob to engage our anti-rattle device.Now we'll go ahead and go over a few clearance measurements. We have about 13 inches of ground clearance. The closest part of the carrier to the rear of the vehicle is about four inches. more


Watch Video

6/20/2013 3:00:16 PM



Thule Vertex 4 Hitch Bike Rack Review - 2013 Nissan Murano- Video

Thule Vertex 4 Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano we'll be test fitting the Thule Vertex Four Bike Carrier, part number th9029. To begin our test fit we'll slide the shank of the carrier into the receiver tube of our hitch. Line up the pin hole and thread in our anti-rattle bolt. Go ahead and tighten it with a wrench and secure with the lock on the other side.Now we can go ahead and go over a few clearance measurements. We have about 13-1/2 inches of ground clearance. From the closest part of the carrier to the rear of the vehicle is about two inches. more


Watch Video

6/20/2013 2:59:16 PM



Thule Hitching Post Pro Hitch Bike Rack Review - 2013 Nissan Murano- Video

Thule Hitching Post Pro Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano, we'll be test-fitting the Thule Hitching Post Pro Folding Tilting Four-Bike Rack, Part number TH934XTR. To begin our test-fit, we'll slide the shank of the carrier end of the receiver to the hitch, line up the pinhole, and thread in our anti-rattle bolt, tightening that with a wrench. Now, we'll go ahead and go over some clearance measurements. We have about 13 1/2 inches of ground clearance. From the closest part of the carrier to the rear of the vehicle is about 5 inches. With the bike carrier in its folded position, we've added about 16 inches to the overall length of our vehicle. more


Watch Video

6/20/2013 2:56:09 PM



Thule Helium Aero Hitch Bike Rack Review - 2013 Nissan Murano- Video

Thule Helium Aero Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano well be test fitting the Thule Helium Aero 2-Bike Carrier, part number th9042. Now to begin our test fit, well simply slide the shank of the carrier into the opening of the hitch, line up our pin holes, allow the integrated pin to fall into place and well then turn the black knob to engage the anti-rattle device. Now that our Thule Helium is secured to our Nissan Murano, well go over a few clearance measurements to see how they fit together. We have about 18 inches of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about 9 inches, and with the cradle arms folded down weve added about 19 inches to the overall length of the vehicle. Well now pull the gray lever at the top of the mast to swing the cradle arms out, and with the cradle arms out weve added about 30 inches to the overall length of the vehicle. more


Watch Video

6/20/2013 2:55:36 PM



Thule Apex 4 Swing Hitch Bike Rack Review - 2013 Nissan Murano- Video

Thule Apex 4 Swing Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano, we'll be test fitting the Thule Apex Swing 4-bike carrier, part number TH9727. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of our hitch, allow the attached pin to slip into position, and then move to the rear of the shank and hand-tighten our anti-rattle device. Now we can go ahead and go over some clearance measurements. We have about 14" of ground clearance. The closest part of the carrier to the rear of the vehicle is about 2". With the bike carrier in the folded position, we've added about 12" to the overall length of our vehicle. more


Watch Video

6/20/2013 2:53:45 PM



Softride Dura Hitch Bike Rack Review - 2013 Nissan Murano- Video

Softride Dura Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano well be test fitting the Softride Dura Parallelogram tilting four bike carrier part #: SR26247. To begin our test fit well slide the shank of the carrier into the receiver tube of our hitch. Well go ahead and line up the pinhole and then thread in our anti-rattle bolt, tightening it with a wrench and then securing it with a lock. Now we can go ahead and go over a few clearance measurements. We have a ground clearance of about 13 and a half inches. The closest part of the carrier to the rear of the vehicle is about four and a half inches and weve added 35 inches to the overall length of or vehicle. more


Watch Video

6/19/2013 4:54:34 PM



Rhino-Rack 4 Hitch Bike Rack Review - 2013 Nissan Murano- Video

Rhino-Rack 4 Hitch Bike Rack Review - 2013 Nissan Murano

Today, on our 2013 Nissan Murano, well be test fitting the Rhino Rack 4-Bike Carrier, Part Number RBC038.To begin our test fit, well slide the shank of the carrier into the receiver tube of our hitch, well line up our pinhole and thread in our anti-rattle bolt, tightening it with a wrench and then securing the lock into place.Now, well go ahead and go over a few clearance measurements. We have a ground clearance of about 13-1/2 inches. From the closest point of the carrier to the rear of our vehicle is about 4-1/2 inches. With the bike carrier in its folded position, weve added about 11-1/2 inches to the overall length of our vehicle.Now, well go ahead and pull the pin at the base of the carrier to allow our carrier to tilt. This allows us to gain easy access to the rear hatch of our vehicle, so that we can access our cargo area when we need to.Now, well put the carrier back in its upright position, replace the pin and then well move to the top of the mast, where well pull the pin to swing out our dual arms. With these extended, weve added about 29 inches to the overall length of our vehicle.Now, well go ahead and undo the cradle straps, well grab our bike, place it into the cradles and use the straps to secure it. more


Watch Video

6/19/2013 4:49:07 PM



Kuat Sherpa Hitch Bike Rack Review - 2013 Nissan Murano- Video

Kuat Sherpa Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano well be test fitting the Kuat Sherpa aluminum platform style hitch mounted two bike carrier part #: S102. To begin our test fit well slide the shank of the carrier into the receiver tube of our hitch. Well go ahead and line up the pinhole and then install our pin and clip. Then well move to the back of the shank where well find the hand knob. We can tighten this to engage our anti-rattle device and secure our rack to our vehicle. Now well go ahead and go over some clearance measurements. more


Watch Video

6/19/2013 4:37:01 PM



Hollywood Racks Traveler 5 Hitch Bike Rack Review - 2013 Nissan Murano- Video

Hollywood Racks Traveler 5 Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano, well be test fitting the Hollywood Racks Traveller 5-Bike Carrier, part number HR9200. To begin our test fit, well slide the shank of the carrier into the receiver tip of our hitch. Line up the hitch pin hole and thread in our anti-rattle bolt, tighten it in with a wrench. Now well go and go over a few clearance measurements. We have about 13 inches of ground clearance. From the closest form of the carrier to the rear of the vehicle is about 6 inches. more


Watch Video

6/19/2013 4:35:09 PM



Hollywood Racks Traveler Hitch Bike Rack Review - 2013 Nissan Murano- Video

Hollywood Racks Traveler Hitch Bike Rack Review - 2013 Nissan Murano

Today on this 2013 Nissan Murano, well be test fitting the Hollywood Racks Traveller 4-Bike Carrier, part number HR8500. To begin our test fit, well slide the shank of the carrier into the receiver tip of our hitch. Line up the pin hole and thread in our anti-rattle bolt, tighten it in with a wrench. Now well go and go over a sure clearance measurements. We have about 13 inches of ground clearance. With the bike rack in the folded position, weve added about 8 inches to the overall length of our vehicle. more


Watch Video

6/19/2013 4:33:54 PM



Kuat NV Hitch Bike Rack Review - 2013 Nissan Murano- Video

Kuat NV Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano, well be test fitting the Kuat NV Aluminum Platform Style 2-Bike Carrier, part number N101. To begin our test fit, well slide the shank of our carrier into the receiver tip of our hitch. Line up the pinhole and then install our pin and clip. Now move to the rear of the shank and tighten the hand knob to engage our anti-rattle device. Now well go ahead and go over a few clearance measurements. We have about 13 inches of ground clearance. more


Watch Video

6/19/2013 11:35:55 AM



Hollywood Racks Sport Rider Recumbent Bike Rack Review - 2013 Nissan Murano- Video

Hollywood Racks Sport Rider Recumbent Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano, we'll be test fitting the Hollywood Racks Sport Rider 2-bike carrier for recumbents, part number HR1000R-1G. Now to begin our test fit, we'll simply slide the shank of the carrier into the opening of the hitch, line up our pin holes, and install and tighten down our anti-rattle bolt. Now with the Hollywood Racks Sport rider secured to our Nissan Murano, we'll go over a few clearance measurements to see how they fit together. We have about 18" of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about 5", and we've added about 29" inches to the overall length of the vehicle. To access the cargo area, we'll simply pull the three black pins at the base of the carrier to fold down the platform as well as the mast. more


Watch Video

6/18/2013 5:26:42 AM



  1