Thule Parkway 2 Hitch Bike Rack Review - 2010 Hyundai Santa Fe- Video

Today on our 2010 Hyundai Santa Fe we're going to do a test fit of the Thule Parkway 2 Bike Carrier, part number TH9587. With our vehicle already equipped with the 2-inch hitch and our bike rack already preassembled we'll go ahead and slide the bike rack shank directly into the receiver tube of the hitch lining up the hitch pin holes. Then we'll install and tighten down our anti-rattle bolt. This is what our bike rack will look like once it's installed on the vehicle. Next, we'll go ahead and take a few measurements. From the nearest point of the vehicle to the nearest point of the upright of the bike rack, we have 6-1/4 inches. more

Watch Video

3/29/2012 11:52:08 AM

Thule Hitching Post Pro Hitch Bike Rack Review - 2010 Hyundai Santa Fe- Video

Today on our 2010 Hyundai Santa Fe we're going to be test fitting the Thule Hitching Post Pro Folding and Tilting 4 Bike Carrier, part number TH934XTR. With our vehicle equipped with the 2-inch hitch and our bike rack already preassembled we'll go ahead and slide the bike rack shank directly into the receiver tube of the hitch lining up the hitch pin holes. Then we'll install and tighten down my anti-rattle bolt. This is what our bike rack will look like in its stored position. Next, we'll go ahead and give you a few measurements. From the nearest point of our bike rack upright to the nearest point of the bumper is 6 inches. more

Watch Video

3/29/2012 11:52:02 AM

Thule Apex 4 Hitch Bike Rack Review - 2010 Hyundai Santa Fe- Video

Today on our 2010 Hyundai Santa Fe we're going to be doing a test fit of the Thule Apex 4 Bike Carrier, part number TH9025. With our vehicle equipped with the 2-inch hitch and our bike rack already preassembled we can go ahead and slide the bike rack shank directly into the receiver tube of the hitch and line up the integrated hitch pin lock. Then we'll use the hand knob to secure the bike rack to the vehicle. As you can see, with the hand knob tightened down, it really takes out any sway or rattle between the bike rack and the vehicle. This is what our bike rack will look like in its stored position. Next we'll go ahead and take a couple of measurements. more

Watch Video

3/29/2012 11:51:56 AM

Pro Series Q-Slot Hitch Bike Rack Review - 2010 Hyundai Santa Fe- Video

Today on our 2010 Hyundai Santa Fe, well be test fitting the Pro Series Q Slot Platform Style 2 Bike Carrier, part number PS63134. With our vehicle equipped with a 2-inch hitch and our bike rack already preassembled, we can go ahead and slide the bike rack shank directly into the receiver tube of the hitch, lining up the hitch pinholes. Then well install our 5/8 pin and take the clip. Alright, with our bike rack installed, this will look like in its stored position. Next, well go ahead and take a few measurements. From the nearest point of the vehicle to the nearest point of the platform of the bike rack is 7-1/2 inches. more

Watch Video

3/29/2012 11:51:50 AM

Thule Vertex 4 Hitch Bike Rack Review - 2010 Hyundai Santa Fe- Video

Today on our 2010 Hyundai Santa Fe we're going to do a test fit of the Thule Vertex 4 Bike Carrier, part number TH9029. With our vehicle equipped with a 2-inch hitch and our bike rack already preassembled, we can go ahead and slide the bike rack shank directly into the receiver tube of the hitch lining up the hitch pin holes. Then we'll install and tighten down the anti-rattle bolt. As you can see, with the anti-rattle bolt tightened down, it really takes out any movement between the bike rack and the hitch. This is what our bike rack will look like in the stored position. Next, we'll go ahead and take a few measurements. more

Watch Video

3/29/2012 10:37:48 AM

Thule Doubletrack Hitch Bike Rack Review - 2010 Hyundai Santa Fe- Video

Today on our 2010 Hyundai Santa Fe we're going to be test fitting the Thule Doubletrack Platform-Style 2 Bike Carrier, part number TH990XT. With our vehicle equipped with the 2-inch hitch and our bike rack already preassembled we'll go ahead and slide the bike rack shank directly into the receiver tube of the hitch lining up the hitch pin hole. Then we can install and tighten down the anti-rattle bolt and lock. As you can see, with the anti-rattle bolt tightened down, it really takes out any sway or movement between the bike rack and the vehicle. This is what our bike rack will look like in its stored position. Now we'll go ahead and give you a few measurements. more

Watch Video

3/29/2012 10:37:39 AM

SportRack EZ Hitch Bike Rack Review - 2010 Hyundai Santa Fe- Video

Today on our 2010 Hyundai Santa Fe, were going to do a test fit of the SportRack 2 Bike Hitch Mounted Bike Rack, part number A30901. Our vehicle is equipped with a 2-inch hitch and our bike is already preassembled. Well go ahead and slide the bike rack shank directly into the receiver tube of the hitch, lining up the hitch pinhole. Then we can install and tighten down the anti-rattle bolt and safety clip. As you can see with the anti-rattle bolt tightened down, it really takes out any movement between the bike rack and the vehicle. This is what our bike rack will look like in a stored position. more

Watch Video

3/29/2012 10:37:26 AM

SportRack Escape 3 Hitch Bike Rack Review - 2010 Hyundai Santa Fe- Video

Today on our 2010 Hyundai Santa Fe, were going to be test fitting the SportRack Escape 3 Bike Hitch Mounted Bike Rack, part number A30403. Our vehicle is already equipped with a 2-inch hitch and our bike rack is already preassembled. So we can slide the bike rack shank directly into the receiver tube of the hitch, lining up the hitch pinhole. Then well install and tighten down our anti-rattle bolt and safety clip. As you can see with the anti-rattle bolt installed and tightened down, it really takes out any movement between the bike rack and the vehicle. This is what our bike rack will look like in its stored position. more

Watch Video

3/29/2012 10:37:20 AM

  1