SportRack EZ Hitch Bike Rack Review - 2011 Ford Expedition- Video
Today on our 2011 Ford Expedition, well be test fitting part number a30901, the Sport Rack two bike hitch mounted bike rack with mount cradles for both inch and a quarter and two inch hitches. Now to begin our test fit well slide our bike rack shank with the included adapter into the hitch, line up the hitch pin hole, and install and tighten down our anti-rattle bolt. With our bolt tight our bike rack is secured to the vehicle. Now well go ahead and give you a few measurements, our ground clearance at the bike rack is 23-1/8 inches and from the closet point of the bike rack to the back of the vehicle is 10-1/2 inches. Now well go ahead and unfold the bike rack platform and open our cargo door and as you can see we can gain full access to the cargo area opening our cargo door completely with this bike rack. Were now almost ready to load our bike, all we need to do is make sure that our wheel loop straps are undone and out of the way and that our vertical bar clamp is fully extended. more
12/19/2012 10:08:38 AM
Pro Series Q-Slot Hitch Bike Rack Review - 2011 Ford Expedition- Video
Today on our 2011 Ford Expedition well be test fitting part number PS63134. This is the Pro Series Q-slot platform style two bike carrier for both inch and a quarter and two inch hitches. Now to begin our test fit well slide the shank with the included adapter into the hitch, line up the hitch pin hole and install our hitch pin. Well then put the safety clip on the other side of our hitch pin which will secure our bike rack to the vehicle. Now well go ahead and give you a few measurements. Our ground clearance at the bike rack is 22 1/8th inches and from the closest point of the bike rack to the back of the vehicle is 10 inches. more
12/18/2012 10:17:08 AM
Swagman Titan Hitch Bike Rack Review - 2011 Ford Expedition- Video
Today on our 2011 Ford Expedition, well be test fitting the Swagman Titan 4-Bike Carrier, product number S63410. With our vehicle already equipped with the 2-inch hitch and our bike rack already preassembled were ready to go ahead and fit it to the vehicle. Well begin by inserting the bike rack shank into the hitch. Well line up the hitch pin hole and go ahead and insert our anti-rattle bolt. With our anti-rattle snug, well go ahead and tighten it up with a wrench and install our safety pin. With our anti-rattle bolt tight and our pin installed our bike rack is secured to the vehicle and were ready to load a bike.At this point, well give you a few measurements. more
2/2/2012 11:51:33 AM
Thule Apex 4 Hitch Bike Rack Review - 2011 Ford Expedition- Video
All right today in 2011, Ford Expedition. We're going to do a test to the part number TH9025 from Thule. This is Apex 4 bike carrier. Few quick notes what this bicycle carry, they will work with a two-hinge receiver hitch with provided spacer, and also work on inch and quarter receiver hitches, both class one and class two. However, when you use it on a class one receiver hitch, youre limited to just two bikes. Okay. more
1/30/2012 4:20:30 PM
