Thule Doubletrack Hitch Bike Rack Review - 2012 Chrysler 200- Video
All right today on this 2012 Chrysler 200, we're going to do a test fit of part number TH990XT from Thule, this is a Double Track Platform Bicycle Rack. Okay, a few points to know about this bicycle rack that it will work inch and a quarter receiver hitches both class one and class two. This will also work with two-inch receiver hitches with the included spacer. On this vehicle, we'll be working with a class one receiver hitch. We'll start off our test fit by installing the bike rack into the hitch, then we'll tighten down the anti-rattle bolt and then install the lock on the other side. Okay, with the bike rack installed, let's go ahead and get some clearance measurements. more
5/9/2012 6:50:12 PM
Thule Apex 4 Hitch Bike Rack Review - 2012 Chrysler 200- Video
Today on our 2012 Chrysler 200, we'll test fitting the Thule Apex Four-Bike Carrier, part number TH9025. Now our vehicle's equipped with an inch and a quarter hitch, so we remove the adaptor sleeve from our bike rack shank. Please note that when using in a class one hitch, you are limited to two bikes with this bike rack. Now to begin our test fit, we'll simply slide the bike rack shank into the hitch, line up the hitch pin hole and using the integrated locking hitch pin, we'll allow to slide into place. With it in place, we'll simply tighten down the anti-rattle knob here on the side of the shank. With that, our bike rack's secured to the vehicle and we're ready to load it up. more
5/9/2012 6:25:38 PM
Kuat Alpha Hitch Bike Rack Review - 2012 Chrysler 200- Video
Today on our 2012 Chrysler 200 well be test fitting the Kuat alpha folding locking 3 bike aluminum bike rack for inch and a quarter hitches. To begin our test fit well simply slide our bike rack shank into the hitch, line up the hitch pinhole and install out hitch pin. We can then move to the back of the bike rack and tighten down the anti-rattle knob. This will secure your bike rack to your vehicle. Now well go ahead and give you a few measurements. Our ground clearance at the bike rack is 10 inches and from the closest point of the bike rack mast to the bumper is 6 inches. more
5/9/2012 5:07:32 PM
Swagman Titan Hitch Bike Rack Review - 2012 Chrysler 200- Video
Today on this 2012 Chrysler 200 were going to do a test fit of part #: S63410 from Swagman, the Titan 4 bicycle rack. Some things you need to know about this bicycle rack that that it will work with inch and a quarter receiver hitches both class 1 and class 2, however when you use this bicycle rack on a class 1 receiver hitch youre limited to carrying just 2 bicycles. Now this will also work with 2 inch receiver hitches with the included spacer and on this vehicle today well be working with a class 1 receiver hitch. Now well start off our test fit by installing the bike rack into the hitch, then well go ahead and tighten down the anti-rattle bolt and put the safety clip on the other side. Alright, with the bike rack installed well go ahead and get some clearance measurements. From the bike rack to the bumper at its closest point is 7 inches. more
5/9/2012 4:49:37 PM
SportRack EZ Hitch Bike Rack Review - 2012 Chrysler 200- Video
Today on our 2012 Chrysler 200 well be test fitting the Sport Rack 2 bike hitch mounted bike rack part #: A30901. Now to begin our test fit well simply slide the bike rack shank into the hitch, line up the hitch pinhole and install our anti-rattle bolt. With our bolt tight our bike rack is secured to the vehicle. Now we can go ahead and give you a few measurements. Our ground clearance at the bike rack is 14 and a half inches and from the closest point of the bike rack to the back of the vehicle is 7 inches. Well now go ahead and pull the platform down on our bike rack and open our trunk. more
5/9/2012 4:39:47 PM
Rhode Gear Highway Hitch Bike Rack Review - 2012 Chrysler 200- Video
Alright, today on this 2012 Chrysler 200 were going to do a test fit of part #: RG8015220 from Road Gear, this is their Highway 2 bicycle rack. A few things to know about this bicycle rack that does work with inch and a quarter receiver hitches both class 1 and class 2 and this will also work with 2 inch receiver hitches with the included spacer and on this application well be working with class 1 receiver hitch. Now well start off by installing the bike rack into the hitch and then well go ahead and tighten down the anti-rattle bolt and then install the safety clip on the other side. Alright, at this point we can go ahead and get some clearance measurements. From the bike rack to the bumper at its closest point were looking at a distance of 6 inches. Ground clearance is going to be 8 and a half inches. more
5/9/2012 4:34:46 PM
Thule Vertex 4 Hitch Bike Rack Review - 2012 Chrysler 200- Video
Today on our 2012 Chrysler 200 we'll be test fitting the Thule Vertex 4 Bike Carrier, part number TH9029. Now to begin our test fit we'll simply place the bike rack shank into the hitch, line up the hitch pin hole and install our anti-rattle bolt. With our bolt tight, our bike rack is secured to the vehicle. Now we'll give you a few measurements. From the bottom or the bike rack to the ground is 10-1/2 inches and from the closest point of the bike rack to the back of the vehicle is 2-1/2 inches. Now we'll go ahead and pull the hitch switch at the bottom of the bike rack mast to tilt the mast down. more
4/30/2012 10:54:47 AM
