bing tracking image

2011 Chevrolet Traverse Hitch Bike Racks Installation And Review Videos

     

Thule Hitch Bike Racks Review - 2011 Chevrolet Traverse- Video

Thule  Hitch Bike Racks Review - 2011 Chevrolet Traverse

Today on our 2011 Chevrolet Traverse we're going to be doing a test fit on the Thule Vertex. This is a folding and tilting 4-bike rack. They've designed it for use with 1-1/4" or 2" hitches. Part number on it is going to be TH9029XT. This is a upgrade version from the old Vertex they had. A few things are slight differences in the cradles here, and our mast will actually lock in the down position as well, which is really nice. Now the rack's going to hold the bike in place using two upper frame straps and one anti-sway cradle strap. more


Watch Video

4/27/2015 5:43:21 PM



Yakima DoubleDown Ace Hitch Bike Rack Review - 2011 Chevrolet Traverse- Video

Yakima DoubleDown Ace Hitch Bike Rack Review - 2011 Chevrolet Traverse

Today on our 2011 Chevrolet Traverse, we'll be test fitting the Yakima DoubleDown Ace 4-bike carrier for 1-1/4" and 2" hitches, part number Y02451. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our attached pin. We'll move to the rear of the shank and tighten the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now we'll go over a few clearance measurements. We have about 16" of ground clearance. The closest point of the carrier to the rear of our Traverse is about 2-1/2". more


Watch Video

7/15/2013 3:56:27 PM



Yakima DoubleDown Ace 2 Bike Rack Review - 2011 Chevrolet Traverse- Video

Yakima DoubleDown Ace 2 Bike Rack Review - 2011 Chevrolet Traverse

Today on our 2011 Chevrolet Traverse, we'll be test fitting the Yakima DoubleDown Ace 2-bike carrier for 1-1/4" and 2" hitches, part number Y02450. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install the attached pin. We'll move to the rear of the shank and tighten the hand knob to secure the bike rack to our vehicle and engage our anti-rattle device. Now we'll go over a few clearance measurements. We have about 16" of ground clearance. The closest point of the carrier to the rear of our Traverse is about 2-1/2". more


Watch Video

7/15/2013 3:55:56 PM



  1