Front Mount Trailer Hitch Installation - 2007 Dodge Ram- Video
Today on our 2007 Dodge Ram 1500, we're going to be doing a review and installation of the curved front-mounted trailer hitch receiver, part number 31320. This is what your front-mounted hitch will look like once you have it installed. It's going to have a nice, sleek look on the front end and not protrude out very far from the bumper. It's going to be tucked up and underneath, so you won't have anything visible from the front besides the receiver tube, which is going to be at 2 by 2 inch square tubing with a 5/8s inch pinhole through the side. This receiver is going to have a 9,000 lb line weight, which means if you have a wedge or any kind of lines hooked up to it, it's going to support you pulling 9,000 lbs with it. A vertical tongue 00:46 weight of up to 500 lbs, and a trailer weight of up to 5,000 lbs. Now we'll go ahead and get a few measurements. From the center of our pinhole to the outermost part of our bumper, it's going to be about 3 and a half inches. more
9/15/2015 2:31:07 PM
