Draw-Tite Front Mount Trailer Hitch Installation - 2018 Chevrolet Silverado 2500- Video
Hello neighbors, it's Brad here at Etrailer, and today we're taking a look and installing the Draw-Tite Front hitch receiver on a 2018 Chevy Silverado 2500. Now your front hitch is gonna be a two inch by two inch, which means that there's gonna be plenty of options available as far as either putting a ball mount, a winch, a cargo carrier, or a bike rack. Now all of these accessories are gonna stay in place with a 5/8 pin and clip. Now this is not included with the front hitch, but a lot of times your accessories will come with one. Now if you want to pick up an extra or a locking one, we have those available here at etrailer, and that way you can leave your accessories loaded on, locked in place, and no one can walk away with them. No matter what accessory you're gonna be loading up, you do want to adhere to the weight capacities and if you're using a winch, this does have a line pull of 9,000 pounds, but all of your cargo weight or anything that's gonna be supported on your front hitch like your cargo carriers, or bike racks, or winches, are going to have a 500 pound capacity. more
6/7/2023 2:03:24 PM
Best 2018 Chevrolet Silverado 2500 Front Receiver Hitch Options- Video
Hello neighbors. It's Brad here at etrailer. And today we're taking a look at the best front trailer hitch options for a 2018 Chevy Silverado, 2,500. So for the Silverado front hitch options, there's actually gonna be three of them that we'll be looking at. And you may only see two here but first we'll start with our Curt. Then we have our DrawTite and actually installed on the truck is gonna be the EcoHitch. more
7/8/2022 2:43:13 PM
Front Mount Trailer Hitch Installation - 2018 Chevrolet Silverado 2500 - Curt- Video
Speaker 1: Today on our 2018 Chevrolet Silverado 2500, we're going to be installing Curt's Front Mount Trailer Hitch Receiver, part number C31071.This is what our hitch is going to look like when it's installed. As you can see, it's tucked up underneath our front bumper, so you're really only going to be able to see the receiver tube and it's tucked back far enough where you almost don't even notice it's there. It's got a 2" x 2" receiver end, so it'll work with any of your favorite accessories such as winch plates, snow plows, or over-the-bed extenders. It uses a 5/8" hitch pin and clip. One doesn't come included, but you can pick one up here at etrailer.com with part number PC3.It has a 500 pound tongue weight, a 5000 pound gross towing capacity, and a 9000 pound straight line pull. Now to help you when deciding on accessories, I've got a few measurements for you. more
7/11/2018 1:08:22 PM
