2009 Chevrolet Silverado Fifth Wheel Installation Kit Installation And Review Videos

Reese Quick Install Base Rails Kit Installation - 2009 Chevrolet Silverado- Video

On this 2009 Chevrolet Silverado, we're going to review and install Part Number RP56007-53. This is Reese Quick Install Custom Base Rails and Outboard installation kit for fifth-wheel trailer hitches. All right, this is what the kit looks like when it's installed in our truck. First off, you can see a long, flat plate that fits on the side of the frame. Now, there are variations in the frame of this truck, so it will accommodate all versions. Now, this does bolt on to the side of the frame using the existing hole here and the fasteners actually work as a clamp on this side of the bracket. This is the passenger's side and this is basically identical to over on our driver's side. Now, when we install this kit, the rails, of course, need holes in the bed of the truck to attach bolts through. On other designs, these bolts are actually towards the inside. more

10/28/2015 9:31:07 AM

Fifth Wheel Hitch Kit Installation - 2009 Chevrolet Silverado 2500- Video

Today on this 2009 Chevrolet Silverado 2500 series, 6 foot bed, we will be installing the Signature Series rails and brackets part number 30061. We are going to do a couple of things in preparation to installing our Signature Series rails and brackets. First, we will need to lower the spare tire out of the way, and next we will need to remove the heat shield over here on the passenger side. We are going to remove this section, just forward of this cross member here, all the way back to the rear of the vehicle. :27 more

3/1/2010 3:24:15 PM

Fifth Wheel Hitch Kit Installation - 2009 Chevrolet Silverado 2500 HD- Video

Today on this 2009 Chevrolet Silverado 2500 HD Pickup we are going to install part number 50061-6008 from towing products. First thing we need to do is get the truck ready to install the 5 th wheel. Lower the spare tire, also in this case the vehicle has a factory brake controller which you need to take the sensor off the inside of the frame rail and get that out of the way so we can install the hardware. more

9/1/2009 5:48:32 AM