2012 Toyota RAV4 Custom Fit Vehicle Wiring Installation And Review Videos

Best 2012 Toyota RAV4 Trailer Wiring Options- Video

Today we're going to be a taking a look at the best trailer wiring harnesses available for the 2012 Toyota Rav4. We've got two different kits to look at today. Here we've got our Curt, this is part number C56165. Of course, just like our Tacancha this is going to give us a four pole flat trailer connector, which is going to deliver our right turn and brake, our left turn and brake, our running lights, and our ground for our trailer, cargo carrier, whatever we decided to operate. Here, we have a very similar kit. This is the Tacancha T1 vehicle wiring harness. Again, the four pole flat trailer connector, this is part number 118412. more

1/4/2017 2:37:17 PM

Trailer Wiring Harness Installation - 2012 Toyota RAV4- Video

Today on our 2012 Toyota Rav4, well be installing the Tow Ready Custom Fit Vehicle Wiring, part number 118412. Now to being our installation well go ahead and open the rear cargo door where well need to remove the carpet as well as the floor from the cargo area. With that done well remove the rear threshold here. After using a little effort to get the threshold undone, well go ahead and set it off to the side for reinstallation later. We can then go ahead and remove the forward panel here on the floor. With that done, well undo screws holding the forward panel in place where we can then pry it up out of the way, again setting it off to the side for reinstallation later. Well now move onto the side panels. more

2/1/2013 1:28:48 PM