bing tracking image

2012 Toyota Camry Custom Fit Vehicle Wiring Installation And Review Videos

     

Tekonsha T-One Vehicle Wiring Harness Installation - 2012 Toyota Camry- Video

Tekonsha T-One Vehicle Wiring Harness Installation - 2012 Toyota Camry

Today on this 2012 Toyota Camry we're going to review and install the Tekonsha T-One vehicle wiring harness with a four pole flat trailer connector. This is what our wire harness looks like when installed in a vehicle. Now you can see, we don't have it mounted to anything because when we're not using it, it's going to stay inside our trunk of our car. It can simply ride inside here and be protected from the elements when not in use. This is great for situations where you tow your trailer, or have it set where it lights in the back very few times of the year. And when you are ready to use it, and you keep it on the inside of vehicle, just pull out what you need to go down to your trailer's connector and you can simply close the hatch. more


Watch Video

6/3/2019 2:27:24 PM



Best 2012 Toyota Camry Trailer Wiring Options- Video

Best 2012 Toyota Camry Trailer Wiring Options

Speaker 1: Today we're going to be taking a look at the best wiring options for your 2012 Toyota Camry. Over here we're going to have the CURT wiring kit. It's going to provide us with a four-pole flat trailer connector. Then over here we're going to have the Tekonsha wiring kit. It's also going to provide us with a four-pole flat trailer connector.The differences between our two wiring kits is going to be very small. The major difference is going to be the powered converter. more


Watch Video

6/28/2018 10:47:33 AM



Trailer Wiring Harness Installation - 2012 Toyota Camry- Video

Trailer Wiring Harness Installation - 2012 Toyota Camry

All right. Today on this 2012 Toyota Camry we're going to install Part Number C55567 from Curt. This is a T-Connector Vehicle Wire Harness With a 4-Pole Flat Trailer Connector. To start off our install we need to go ahead and open up the back hatch and remove all the floor coverings until we get down to the spare tire area. Next we need to go ahead and remove the threshold with the two plastic fasteners that we have to remove. We pull off the centers first, then we go ahead and pull off the rest of the fastener. Then we go ahead and pop loose the threshold. With steady pressure from the bottom, we pop it up. Now we'll go ahead and move on to the liners on the side. more


Watch Video

2/6/2015 12:26:20 PM



  1