Best 2010 Subaru Outback Wagon Custom Fit Vehicle Wiring Options- Video
Hey everybody, Ryan here at etrailer. Today we're gonna be checking out our best trailer wiring options for your 2010 Subaru Outback Wagon. Today we're gonna be looking at three different kits. All right, so right here we have the Tekonsha wiring. In the middle we have the CURT wiring, and over here we have the Hopkins wiring. And to be honest with you you really can't go wrong with any of these. more
1/23/2023 9:47:31 AM
Curt T-Connector Vehicle Wiring Harness Installation - 2010 Subaru Outback Wagon- Video
Ryan: Hey, everybody. Ryan here at etrailer.com. Today on our 2010 Subaru Outback wagon we're going to be taking a look at and showing you how to install the Curt T-Connector Vehicle Wiring Harness. This is going to provide us with all the necessary lightning functions to not only remain safe and legal, but to also let other motorists know what our intentions are as we're going down the road.Our wiring is going to provide us with more than enough power to work with either incandescent or even LED lighting. It's going to have three amps per circuit for the stop and turn, and six amps for our tail light circuit. Now, one of the things I really like about this wiring kit is that it uses a module box. more
6/12/2019 11:08:05 AM
Trailer Wiring Harness Installation - 2010 Subaru Outback Wagon- Video
Today on our 2010 Subaru Outback Wagon we'll be installing the CURT t-connector wiring kit, part number C56040. To begin our install we'll first need to go ahead and remove the rear cargo liner. Next we'll need to remove the center cargo tray. We'll go ahead and remove the carpeting on the drivers side. Then we'll go ahead and remove the cargo tray on the drivers side. To remove the cargo tray we'll need to remove the two fasteners securing it in position. more
6/21/2013 12:00:11 PM
Trailer Wiring Harness Installation - 2010 Subaru Outback- Video
Alright, today on this 2010 Subaru Outback, we are going to install part number 118467 from Tow Ready. OK, the first thing that we need to do is get in the back of the vehicle. We need to open the trunk area. Alright, we will take out the floor panels. Start with this cover here. Now we have to take out the Styrofoam parts too. And we are going to work our way down to the sheet metal here. And then we are going to remove this piece of Styrofoam here, There are a couple of little plastic rivets. 0:51 more
7/9/2010 8:55:27 AM
