Curt T-Connector Vehicle Wiring Harness Installation - 2019 Subaru Crosstrek- Video
Ryan: Hey everybody, Ryan here at etrailer. Today on our 2019 Subaru Crosstrek, we're going to be taking a look at and showing you how to install the Curt T-Connector Vehicle Wiring Harness. So what I really like about this setup is that whenever you're not using it, it's going to be out of sight and out of the elements, but whenever you are ready to use it, it's going to be really easy. Wiring is going to be stored just inside of your hatch. Now, if we just lift up on our floor covering, we can grab our wiring storage. Now, the way this works is you're simply just going to lay the wiring across your threshold pretty much anywhere you want, other than one area, you want to avoid the latch because if the wiring gets caught in it, you could potentially pinch a wire and damage it. more
6/8/2020 1:07:07 PM
Best 2019 Subaru Crosstrek Trailer Wiring Options- Video
Hey guys, Shane here with etrailer.com. Today, we're going to be taking a look at the best wiring options for your 2019 Subaru Crosstrek. Here on your left we're going to have the Curt, here in the center, we're going to have the Tekonsha, here on your right side we're going to have the Hopkins. Now all three of our wiring harnesses are going to be very similar. They're all going to Mount the same way. Let's come over and take a closer look at our Curt. more
11/7/2019 11:02:42 AM
Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2019 Subaru Crosstrek- Video
Today in our 2019 Subaru Crosstrek, we're going to be installing Hopkins plug-in simple vehicle wiring harness. This four-pole wiring harness is going to provide you with all the necessary lighting you need to haul your trailer. It'll give you your left turn signal, right turn signal, tail lamps and brake lamps, keeping you DOT compliant in all states. The module is pre-installed onto your harness, will protect your vehicle's circuits by shutting down any of your trailer's circuits that may have a short on them, preventing any damage to the vehicle. Located on our four-pole connector here, we have a dust cap to keep out any dirt and debris, ensuring long-lasting operation of our harness.We'll begin our installation at the back of the vehicle. You'll need to access your rear compartment, so we're going to flip this up. more
3/8/2019 4:37:40 PM
Trailer Wiring Harness Installation - 2019 Subaru Crosstrek- Video
Today on our 2019 Subaru Crosstrek, you're going to be taking a look at . I'm going to show you how to install the T-One vehicle wiring harness support full flat trailer connector. Part number 1-1-8-4-6-7.this is what our wiring looks like when it's installed. This is going to give us all the proper lighting functions to safely tow our trailer. So it's going to give you both turn signals, running lights, brake lights, and our ground. It's also going to come with an attached dust cap to keep any dirt or debris from getting onto our connections. more
12/20/2018 1:52:27 PM
