Curt T-Connector Vehicle Wiring Harness Installation - 2018 Subaru Crosstrek- Video
Hey everybody, Ryan here at etrailer. Today on our 2018 Subaru Crosstrek, we're gonna be showing you how to install the Curt Trailer Wiring Harness. But before we get into that, why don't we take a minute, check this out and make sure it's gonna work for you. So you got yourself a trailer hitch and now you're wanting to pull a trailer around. Well, you're gonna need a way to illuminate all the lights on the trailer. That way you know you'll stay legal, for one, 'cause it is required in all 50 states. more
11/28/2022 11:32:08 AM
Best 2018 Subaru Crosstrek Trailer Wiring Options- Video
Hey guys, Shane here with HR.com. Today, we're going to be taking a look at the best wiring options for your 2018 Subaru Crosstrek. Here on your left, we're going to have the CURT. Here in the center, we're going to have the Tekonsha. Here on your right side, we're going to have the Hopkins. Now all three of our wiring harnesses are going to be very similar. more
11/7/2019 11:03:10 AM
Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2018 Subaru Crosstrek- Video
Speaker 1: Today, in this 2018 Subaru Crosstrek, we'll be having a look at, and showing you how to install, the Hopkins Plug-in Simple Vehicle wiring harness with four-pole flat trailer connector, part number HM11143865.Here's what our wiring looks like installed. You'll notice we have an adequate length wire to secure it to the safety chain loops on our hitch, with the provided dust cover. Once you're ready to tow, you can unclip the dust cover, and hook up to your trailer. This wiring harness is great because it plugs into your vehicle's factory tow package wiring, with no cutting or splicing required, and gives you the basic lighting functions that are required by law in order to safely and legally tow a trailer.Our green wire provides our right-turn signal and right brake light. Our yellow wire provides our left-turn signal and left brake light. Our brown wire is for our tail lights and marker lights. more
11/10/2017 11:19:50 AM
Trailer Wiring Harness Installation - 2018 Subaru Crosstrek- Video
Speaker 1: Today, on our 2018 Subaru Crosstrek, we'll be having a look at and showing you how to install the Tekonsha T-One vehicle wiring-harness with a 4-pole, flat trailer connector, part number 118467.One nice thing about this wiring harness, if we're not using it, we can easily conceal it and store it inside the spare tire compartment of our vehicle. Now when we want to use it, we can grab the wiring harness, pull it out, drape it over our hatch, make sure it's to the side of our latch, and close our hatch down over it, and we have an adequate length of wire to reach down by the receiver of our hitch to hook up to our trailer. Now this wiring harness is great, because it requires no modification of the vehicle in order to install it. It hooks right up to your vehicle's existing, factory-installed, tow-package connector, and provides the necessary lighting functions that are required by law in order for you to safely and legally tow a trailer.This green wire here provides our right turn signal and right brake light. On that circuit, we have 2.1 amps of power output, which is sufficient to tow a trailer that has one incandescent light bulb on that side. If you have LEDs, since they draw less power, you can run a few more light bulbs. more
11/9/2017 2:18:13 PM
