Trailer Wiring Harness Installation - 2009 Saturn Vue- Video
Today on this 2009 Saturn View we'll be installing a Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part number C56026. We'll glue the fastener at the bottom of the inner cargo pocket. Using a flat blade screwdriver go ahead and twist out the plastic cap nut. Once we have all of the fasteners out of the corner panel we'll then go ahead and remove the corner pocket. The corner pocket has a push pin fastener in the bottom, so we'll get underneath it and gently pull it up until it releases. To remove the corner pocket I'm just using a plastic pry tool. more
12/22/2014 1:24:06 PM
Trailer Wiring Harness Installation - 2009 Saturn Vue 118443- Video
Today on our 2009 Saturn Vue will be installing Tow Ready T-One Connector, part number 118443. Now to begin our installation, we'll need to open the rear left gate, remove the threshold plate, the trunk floor panels and the spare tire tray from the vehicle. Now on the driver side of the vehicle, we need to remove the fasteners that hold the black Styrofoam tray where we can then carefully pry the black tray out from the underneath the side panel. We'll next locate the plastic side pocket inside the driver's side trim panel. We also need to remove the screw here, slowly pull up on the tray until it pops out of the panel. This will expose our wiring that are T-One Connector will tap. more
11/21/2012 11:46:41 AM
